EMACHINE'i laserribaskanneri kasutusjuhend

1. Sissejuhatus

This manual provides detailed instructions for the proper use, setup, and maintenance of your EMACHINE Laser Barcode Scanner, model IDATA LS-6030U. This device is designed for fast and simple barcode reading across a wide variety of applications, featuring an ergonomic design for enhanced handling and a rubber coating for high protection.

2. Pakendi sisu

Palun kontrollige paki sisu hoolikalt. Kui mõni ese on puudu või kahjustatud, võtke viivitamatult ühendust müüjaga.

• Laserribakoodide skanner
• USB-kaabel (1.8 meetrit)
• Kasutusjuhend (see dokument)

3. Toote omadused

The EMACHINE Laser Barcode Scanner offers robust performance and user-friendly features:

• Valgusallikas: 650 nm (+10/-5 nm) Laser Diode, 1mW (peak)
• Teravussügavus: (4 mils) 400 mm
• Skannimise kiirus: 100 skannimist sekundis
• Resolutsioon: 0.1 mm (4mils) - Code 39
• Prindi kontrastsus: 45% või rohkem
• Skaneerimisnurk: 38°
• Näitajad: Green/Red LED & audio signal
• Liides: USB
• Toetatud sümboloogiad: Code 128, Codabar, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, UPC-A, UPC-E, EAN-13, EAN-8, MSI, PLESSEY, Code 11, Code 39, Code 32, Code 93
• Ergonoomiline disain mugavaks käsitsemiseks.
• Durable rubber and ABS plastic construction for protection.
• No moving parts inside for enhanced durability.
• Kergesti programmeeritav.

4. Seadistusjuhised

Triipkoodiskanneri seadistamiseks järgige neid samme.

1. Ühendage USB-kaabel: Locate the USB cable provided in the package. Insert the smaller end of the USB cable into the port at the base of the barcode scanner handle.
2. Ühendage arvutiga: Insert the standard USB-A end of the cable into an available USB port on your computer or point-of-sale (POS) system.
3. Draiveri installimine (automaatne): The scanner is typically plug-and-play. Your operating system should automatically detect the device and install the necessary drivers. Wait for the installation to complete, which is usually indicated by a notification.
4. Testi ühendus: Open a text editor (like Notepad or Word) or any application where you want to input scanned data. Point the scanner at a known barcode (e.g., from a book or product) and press the trigger button. The scanner should emit a laser beam and an audible beep upon successful scan. The barcode data should appear in your open application.

Figure 4.1: Barcode scanner in use, demonstrating the scanning process.

5. Kasutusjuhised

Operating the EMACHINE Laser Barcode Scanner is straightforward:

1. Toide sisse: The scanner receives power directly from the USB connection. Once connected to a powered USB port, it is ready for operation.
2. Eesmärk: Hold the scanner comfortably in your hand. Point the scanning window towards the barcode you wish to read. Ensure the laser beam covers the entire barcode.
3. Skaneerimine: Press and hold the trigger button located on the handle. A red laser line will project from the scanning window.
4. Successful Scan: Upon a successful read, the scanner will emit an audible beep, and the LED indicator will flash green. The scanned data will be transmitted to your connected computer or POS system, appearing in the active input field.
5. Unsuccessful Scan: If the scanner does not beep or the LED does not flash green, reposition the scanner, adjust the distance, or try scanning from a different angle. Ensure the barcode is not damaged or obscured.

Joonis 5.1: Esiosa view of the barcode scanner.

Joonis 5.2: Külg view of the barcode scanner, showing its profile.

6. Tehnilised andmed

Detailed technical specifications for the EMACHINE Laser Barcode Scanner:

6.1. Elektrilised omadused

• Sisend Voltage: 5 VDC ± 0.5V
• Praegune tarbimine: Maksimaalselt 60mA
• Sertifikaadid: FCC Class B, CE, IEC60825 Class II, CDRH: Class II

6.2. Füüsikalised omadused

• Mõõtmed (L * W * H): 90 x 60 x 160 mm
• Kaal: 110 g ± 5 g (without cable)
• Materjal: Rubber & ABS plastic
• Töötemperatuur: 0° kuni 50°C
• Säilitustemperatuur: -20° kuni 60°C
• Töö niiskus: 10% kuni 85% mittekondenseeruv
• Säilitamise niiskus: 5% kuni 95% mittekondenseeruv
• Ümbritseva valguse häirekindlus: Sunlight up to 36000 Lux
• Kukkumiskindlus: 1.5 m langus

6.3. Reading Performance (Based on Code 39 label PCS=0.9 and 600 lux illumination, tolerance ± 1cm)

• 4 mils: 60 ~ 90 mm
• 5 mils: 55 ~ 120 mm
• 13 mils: 45 ~ 200 mm
• 20 mils: 45 ~ 300 mm
• 40 mils: 65 ~ 400 mm

7. Hooldus

Nõuetekohane hooldus tagab teie vöötkoodiskanneri pikaealisuse ja optimaalse jõudluse:

• Puhastamine: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn smudges, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they can scratch the window and impair scanning performance.
• Hoiustamine: When not in use, store the scanner in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• Kaabli hooldus: Avoid bending or twisting the USB cable excessively, especially near the connectors, to prevent internal wire damage. Do not pull the cable to disconnect the scanner; always grasp the connector itself.
• Vältige kukkumisi: While the scanner has drop resistance, repeated or severe drops can still cause damage. Handle the device with care.

8. Veaotsing

If you encounter issues with your barcode scanner, refer to the following common problems and solutions:

9. Garantii ja tugi

This product is covered by a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or contact your original point of sale or the manufacturer directly.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the vendor or manufacturer using the contact information provided at the time of purchase.