Ken-A-Vision T-17541C Digital CoreScope 2 Compound Microscope

1. Sissejuhatus

This manual provides essential instructions for the safe and effective use of your Ken-A-Vision T-17541C Digital CoreScope 2 Compound Microscope. Designed for biological and educational applications, this digital microscope features a monocular head, LED illumination, and a 1.3-megapixel camera for capturing still images and video. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Ohutusalane teave

• Elektriohutus: Ensure the power supply is connected to a grounded outlet. Do not operate the microscope with wet hands or in damp Enne puhastamist või hooldamist ühendage seade vooluvõrgust lahti.
• Käitlemine: Always carry the microscope by its base and arm. Avoid sudden impacts or vibrations.
• Optiline hooldus: Do not touch optical surfaces with bare fingers. Use only approved lens cleaning materials.
• Ventilatsioon: Ensure adequate ventilation around the microscope to prevent overheating.
• Lapsed: This device is not a toy. Adult supervision is recommended when used by children.

3. Pakendi sisu

Veenduge, et kõik allpool loetletud esemed on teie pakendis olemas:

• Ken-A-Vision CoreScope 2 Digital Microscope
• Toiteallikas
• Applied Vision 4 Software (for Windows, Mac, and Linux)
• Microscope Cover
• Kuuskantvõtit
• Juhised (käesolev juhend)

4. Toote lõppview

The Ken-A-Vision T-17541C CoreScope 2 is a robust digital compound microscope designed for clarity and ease of use. Key components include:

• Monocular Head: Features a fixed 45-degree incline for comfortable viewing and 360-degree rotation.
• Okulaar: 10x widefield eyepiece with a pointer for easy observation.
• Eesmärgid: Reverse-mounted 4x, 10x, and 40xS DIN achromatic lens objectives, protected against humidity and climate variations.
• Floating Stage: Ring stage with spring-loaded clips to secure slides and a stop mechanism to prevent damage.
• Focus Knobs: Separate coaxial coarse and fine focus controls for precise adjustments.
• LED valgustus: Built-in bright and cool white LED light with dimmer and on/off switch.
• Digitaalne kaamera: Integrated 1.3-megapixel (MP), 720P high-definition (HD) CMOS camera with a built-in USB port for direct connection to a computer or monitor.

Joonis 1: Esikülg view of the Ken-A-Vision T-17541C Digital CoreScope 2 Compound Microscope, showing the monocular head, objective lenses, floating stage, focus knobs, and connected USB cable.

Joonis 2: Nurga all view of the Ken-A-Vision T-17541C Digital CoreScope 2 Compound Microscope, highlighting the compact design and the position of the objective lenses and stage.

5. Seadistamine

1. Lahtipakkimine: Carefully remove the microscope and all accessories from the packaging.
2. Paigutus: Place the microscope on a stable, level surface away from direct sunlight, excessive heat, or vibrations.
3. Toiteühendus: Connect the provided power supply to the microscope and then plug it into a standard electrical outlet (120-240V). The microscope can also be powered via a low voltage USB computer connection.
4. Tarkvara installimine: For digital imaging, install the Applied Vision 4 software on your computer. The software is compatible with Windows (XP SP2 or later, Vista, 7), Mac (OS 10.5 or later), and Linux. Follow the on-screen instructions during installation.
5. USB ühendus: Connect the microscope's built-in USB port to your computer using a USB cable. This connection enables the digital camera functionality and can also provide power.
6. Eemalda kate: Remove the microscope cover before use.

6. Kasutusjuhised

1. Toide sisse: Turn on the microscope using the on/off switch for the LED illumination.
2. Reguleerige valgustust: Use the dimmer control to adjust the brightness of the LED light to a comfortable level for viewing your specimen.
3. Paiguta näidis: Place your prepared slide on the floating stage, securing it with the spring-loaded clips.
4. Select Objective: Rotate the nosepiece to select the desired objective lens (4x, 10x, or 40xS). Start with the lowest magnification (4x) for initial viewing.
5. Fokuseerimine:
   • Kasutage jämeda teravustamise nupp (larger knob) to bring the specimen into approximate focus.
   • Seejärel kasutage peenfookuse nupp (väiksem nupp) täpseks fokuseerimiseks ja terava pildi saavutamiseks.
6. Okulaari reguleerimine: Adjust the variable diopter on the eyepiece for optimal visual clarity.
7. Rotate Head: The monocular head can be rotated 360 degrees for shared viewing or comfortable positioning.
8. Digital Imaging (with software):
   • Ensure the microscope is connected to your computer via USB and the Applied Vision 4 software is running.
   • The software will display the live feed from the 1.3 MP HD CMOS camera.
   • Use the software interface to capture still images or record video. Refer to the Applied Vision 4 software manual for detailed instructions on its features.
9. Toide välja: When finished, turn off the LED illumination and disconnect the power supply. Cover the microscope with the provided dust cover.

7. Hooldus

• Keha puhastamine: Wipe the microscope body with a soft, damp riie. Vältige tugevatoimeliste kemikaalide või lahustite kasutamist.
• Läätsede puhastamine: Use a soft lens brush to remove dust. For smudges, use a specialized lens cleaning solution and lens paper. Do not use abrasive materials.
• Hoiustamine: Always cover the microscope with the dust cover when not in use to protect it from dust and debris. Store in a dry environment.
• Niiskuse kontroll: The objective lenses are designed with humidity and climate control protection, but prolonged exposure to extreme conditions should be avoided.

8. Veaotsing

• Valgustus puudub: Check if the power supply is properly connected and the on/off switch is engaged. Ensure the dimmer is not set to its lowest setting.
• Pilt on udune: Adjust both the coarse and fine focus knobs. Ensure the objective lens is properly clicked into place. Clean the eyepiece and objective lenses if smudges are present.
• No Image on Computer Screen: Verify the USB cable is securely connected to both the microscope and the computer. Ensure the Applied Vision 4 software is installed and running correctly. Check your computer's device manager to confirm the camera is recognized.
• Specimen Not Centered: Gently adjust the position of the slide on the floating stage.

9. Tehnilised andmed

10. Garantii ja tugi

The Ken-A-Vision T-17541C Digital CoreScope 2 Compound Microscope is manufactured by Ken-A-Vision Manufacturing, headquartered in Kansas City, MO. For warranty information, technical support, or service inquiries, please refer to the official Ken-A-Vision website or contact their customer service department directly. Please have your model number (T-17541C) and purchase date available when contacting support.