Sissejuhatus
This manual provides comprehensive instructions for the operation and maintenance of your Sharp SPC500 LCD Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
Joonis 1: Esiosa view of the Sharp SPC500 LCD Alarm Clock, showing the digital time display and the Sharp logo.
Seadistamine
1. Aku paigaldamine
The Sharp SPC500 LCD Alarm Clock operates on two (2) AAA batteries (not included). Ensure correct polarity when inserting the batteries.
- Leidke kella tagaküljel või allosas asuv patareipesa kate.
- Eemaldage kate.
- Sisestage kaks uut AAA-patareid, sobitades (+) ja (-) klemmid vastavalt sahtlis olevatele näitudele.
- Asetage patareipesa kate kindlalt tagasi.
2. Algaja seadistamine
After installing batteries, the display may flash or show a default time. Proceed to set the current time.
Kasutusjuhised
Praeguse kellaaja määramine
- Locate the "TIME SET" button, usually on the back or side of the clock. Press and hold it until the time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons (often labeled with arrows or +/-) to adjust the hours and minutes. Pay attention to the AM/PM indicator.
- Press "TIME SET" again to confirm the time and exit the setting mode.
Äratuse aja määramine
- Locate the "ALARM SET" button. Press and hold it until the alarm time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time. Observe the AM/PM indicator.
- Press "ALARM SET" again to confirm the alarm time.
- Ensure the alarm is activated by sliding the "ALARM ON/OFF" switch or pressing the "ALARM ON" button. An alarm icon (e.g., a bell) should appear on the display.
Snooze and Backlight Function
- Kordus: When the alarm sounds, press the large "SNOOZE/LIGHT" button on top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-9 minutes).
- Taustvalgus: The clock features a backlight on demand. Press the "SNOOZE/LIGHT" button to illuminate the display for a few seconds, allowing you to view the time in low-light conditions.
Omadused
- 0.5" LCD display for clear time visibility.
- Ascending alarm volume, starting softly and gradually increasing to ensure you wake up.
- Backlight on demand for easy viewpimedas.
- Compact and portable design, ideal for travel or bedside use.
Veaotsing
| Probleem | Võimalik põhjus/lahendus |
|---|---|
| Ekraan on tühi või tuhm. |
|
| Äratus ei kõla või on liiga vaikne. |
|
| Backlight does not stay on. |
|
| Aeg on vale. |
|
Tehnilised andmed
| Kaubamärk | Terav |
| Mudel | SPC500 |
| Kuva tüüp | Digitaalne LCD |
| Toiteallikas | Patareitoitel (2 x AAA patareid, ei kuulu komplekti) |
| Eriomadused | Alarm, Backlight on demand, Ascending alarm volume |
| Mõõdud (P x L x K) | 9.53 x 6.22 x 5.08 cm (umbes 3.75 x 2.45 x 2 tolli) |
| Kaal | 68.04 g (2.4 oz approx.) |
Hooldus
To ensure the longevity and proper functioning of your Sharp SPC500 LCD Alarm Clock, follow these simple maintenance guidelines:
- Puhastamine: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Patarei vahetus: Replace batteries promptly when the display becomes dim or the clock stops functioning correctly. Remove batteries if the clock will not be used for an extended period to prevent leakage.
- Keskkond: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or dusty environments.
Garantii ja tugi
The Sharp SPC500 LCD Alarm Clock comes with a 1-aastane piiratud garantii alates ostukuupäevast. See garantii katab tootmisdefektid normaalse kasutamise korral.
For warranty claims, technical support, or further assistance, please contact Sharp customer service. Refer to the official Sharp webUusima kontaktteabe saamiseks külastage veebisaiti või ostudokumentatsiooni.
Palun hoidke oma ostutõend garantiinõuete täitmiseks alles.
