Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

Sissejuhatus

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

Ohutusteave

HOIATUS: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

ETTEVAATUST. Kasutage seda seadet ainult vask- või vasega kaetud juhtmega. Ärge kasutage alumiiniumtraadiga.

Toote omadused

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

Pakendi sisu

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

Paigaldusjuhised

1. Lülitage toide välja: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltage testija.
2. Eemaldage vana pistikupesa (kui see on olemas): Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. Valmistage juhtmed ette: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. Ühendage juhtmed:
   • Ühendage roheline või paljas vaskmaandusjuhe pistikupesa rohelise maanduskruvi külge.
   • Ühendage valge neutraaljuhe to the silver-colored screw terminals.
   • Ühendage must või värviline kuum traat to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. Pistikupesa: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
6. Paigaldage seinaplaat: Attach the wall plate over the receptacle.
7. Toite taastamine: Lülitage kaitselüliti või kaitsmekarbi kaudu toide uuesti sisse.
8. Test: Test the receptacle with a known working device to ensure proper operation.

Always consult a qualified electrician if you are unsure about any part of the installation process.

Operatsioon

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

Tähtis: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

Hooldus

• Puhastamine: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp lapiga pinna pühkimiseks. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Ülevaatus: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• Tihedus: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

Veaotsing

Tehnilised andmed

Garantii ja tugi

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton websaidile.

Levitoni ametnik Websait: www.leviton.com