The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 õhutester Kasutusjuhend
Model: GOX 100 (Part Number: 600437)
1. Sissejuhatus
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Ohutusalane teave
- Enne seadme kasutamist lugege see kasutusjuhend hoolikalt läbi.
- Ärge jätke seadet äärmuslike temperatuuride, otsese päikesevalguse ega liigse niiskuse kätte.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Hoidke seadet ja selle osi lastele kättesaamatus kohas.
- Hävitage patareid ja seade vastavalt kohalikele eeskirjadele.
3. Pakendi sisu
Veenduge, et pakendis on kõik esemed olemas:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Kasutusjuhend
- 9V Block Battery (may not be included, check packaging)
4. Seadistamine
4.1 Aku paigaldamine
- Otsige üles akupesa seadme tagaküljel.
- Avage patareipesa kaas.
- Insert a 9V block battery, ensuring correct polarity.
- Sulgege akupesa kaas kindlalt.
4.2 Anduri ühendus
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Kasutusjuhised
5.1 Sisse-/väljalülitamine
- Seadme sisselülitamiseks vajutage nuppu sisse/välja nuppu. Ekraan süttib.
- Seadme väljalülitamiseks vajutage ja hoidke all nuppu sisse/välja nuppu, kuni ekraan välja lülitub.
5.2 Mõõtmine
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Vajutage nuppu režiimis button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Kalibreerimine
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Vajutage ja hoidke all nuppu cal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Hooldus
7.1 Anduri vahetus
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Lülitage seade välja.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Tehke kalibreerimine vastavalt punktis 6 kirjeldatule.
7.2 Puhastamine
- Puhastage seade casing pehme, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8. Veaotsing
| Probleem | Võimalik põhjus/lahendus |
|---|---|
| Seade ei lülitu sisse | Kontrollige aku paigaldust ja laadimist. Vajadusel vahetage aku välja. |
| Ebatäpsed näidud | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Tehnilised andmed
| Parameeter | Väärtus |
|---|---|
| Mõõtmisvahemik | 0 - 100 % Oxygen |
| Resolutsioon | 0.1 % |
| Mõõtmise täpsus | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Toiteallikas | 9V plokk aku |
| Kaitse tüüp | IP65 |
| Mõõdud (K x L) | 106 mm x 67 mm |
| Kaal | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Termiline kompensatsioon | Automaatne |
10. Garantii ja tugi
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER websaidile.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official websaidil või toote dokumentatsioonis oleva kontaktteabe kaudu.
