VWR B001UI040W

VWR Digital Refrigerator/Freezer Thermometer with Alarm User Manual

Kaubamärk: VWR

Mudel: B001UI040W

1. Sissejuhatus

This manual provides instructions for the proper setup, operation, and maintenance of your VWR Digital Refrigerator/Freezer Thermometer with Alarm. This device is designed to accurately monitor temperatures in refrigerators and freezers, featuring a digital display and an audible alarm for temperature excursions.

Palun lugege enne toote kasutamist see kasutusjuhend hoolikalt läbi, et tagada selle ohutu ja tõhus kasutamine.

2. Ohutusalane teave

3. Pakendi sisu

4. Toote omadused

VWR Digital Refrigerator/Freezer Thermometer with Alarm, showing the main unit with digital display, control buttons, and a connected remote probe.

Joonis 1: VWR Digital Refrigerator/Freezer Thermometer. The image displays the white main unit with a blue-bordered digital screen showing "33.7°F" and "FRIDGE" indicator. Buttons for MAX/MIN, ROOM/FRIDGE, and an alarm bell icon are visible on the right. A white wired probe extends from the left side of the unit.

5. Seadistamine

  1. Aku paigaldamine:
    • Otsige üles akupesa põhiseadme tagaküljel.
    • Avage sektsiooni kaas.
    • Insert the required batteries (e.g., AAA, check compartment for type) ensuring correct polarity (+/-).
    • Sulgege akupesa kaas kindlalt.
  2. Sondi paigutus:
    • Carefully route the remote temperature probe into the refrigerator or freezer. Ensure the cable is not pinched by the door seal, which could damage the cable or compromise the seal.
    • Place the probe tip in the area where temperature monitoring is desired. Avoid placing it directly against cooling elements.
  3. Põhiseadme paigutus:
    • Attach the main unit to the exterior of the refrigerator or freezer using its built-in magnets.
    • Ensure the display is easily visible for regular temperature checks.

6. Kasutusjuhised

  1. Toide sisse/välja:

    The device typically powers on automatically upon battery installation. There may not be a dedicated power button; removal of batteries usually powers it off.

  2. Switching Temperature Display (Room/Fridge):

    Vajutage nuppu ROOM/FRIDGE button to toggle between displaying the ambient room temperature (measured by a sensor in the main unit) and the temperature measured by the remote probe (for the fridge/freezer).

  3. Viewing MAX/MIN Temperatures:

    Vajutage nuppu MAX/MIN button once to display the maximum temperature recorded since the last reset. Press it again to display the minimum temperature. Press a third time to return to the current temperature display.

  4. Resetting MAX/MIN Temperatures:

    While MAX or MIN temperature is displayed, press and hold the MAX/MIN button for a few seconds until the display resets to the current temperature. This clears the recorded high and low values.

  5. Häire funktsioon:

    The device features an alarm. Press the Bell Icon button to activate or deactivate the alarm. If the temperature goes outside a pre-set range, an audible alarm will sound. (Specific instructions for setting alarm thresholds are not available; refer to the device's on-screen prompts or manufacturer's website for advanced settings if applicable).

  6. Changing Temperature Units (°C/°F):

    Look for a small switch or button, often located in the battery compartment or on the back of the unit, to switch between Celsius (°C) and Fahrenheit (°F) display.

7. Hooldus

8. Veaotsing

ProbleemVõimalik põhjusLahendus
Ekraan puudub või on hämarTühjad või tühjad patareid; vale patareide paigaldamine.Vahetage patareid, veendudes õiges polaarsuses.
Ebatäpsed temperatuurinäidudProbe improperly placed; probe damaged; unit malfunction.Reposition probe away from direct cooling elements. Check probe for visible damage. If issues persist, contact support.
Äratus ei kõlaAlarm deactivated; temperature not outside set range; low batteries.Press the Bell Icon button to activate the alarm. Verify temperature conditions. Replace batteries.
Nupud ei reageeriUnit frozen (in extreme cold); low batteries; internal malfunction.Bring unit to room temperature. Replace batteries. If problem persists, contact support.

9. Tehnilised andmed

10. Garantii ja tugi

Specific warranty information for the VWR Digital Refrigerator/Freezer Thermometer with Alarm is typically provided with the product packaging or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact VWR customer service or visit their official websaidil. Kontaktandmed on tavaliselt toote pakendil või tootja veebilehel. websaidile.

Tootja: Vwr

Seotud dokumendid - B001UI040W

Preview VWR 12 ja 18 liitrise lineaarse loksutava veevanni kasutusjuhend
VWR-i 12- ja 18-liitriste lineaarsete loksutavate veevannide põhjalik kasutusjuhend. Hõlmab ohutusnõudeid, seadistamist, kasutamist, spetsifikatsioone, hooldust, tõrkeotsingut, garantiid ja utiliseerimist.
Preview VWR Traceable Workstation Barometer with Clock: User Manual and Specifications
Comprehensive guide to operating the VWR Traceable Workstation Barometer with Clock, including setup, features like barometric pressure, temperature, weather forecasting, alarm functions, and technical specifications. Also includes details for the VWR Thermometer.
Preview VWR Labi toodete juhend: teadusseadmete ja -tarvikute põhjalik kataloog
Avastage VWR-i laboritoodete juhendit, mis sisaldab laia valikut kvaliteetseid laboriseadmeid, kulumaterjale ja tarvikuid teadusuuringuteks ja rakendusteks, sh rakukultuuri, PCR-i, labori olulisi tarvikuid, seadmeid ja laborimööblit.
Preview VWR elektroonilise pipeti kasutusjuhend: kasutamine, hooldus ja spetsifikatsioonid
VWR elektroonilise pipeti põhjalik juhend, mis kirjeldab üksikasjalikult selle omadusi, režiime, tööpõhimõtet, tõrkeotsingut ja hooldust täpseks laboratoorseks vedelikukäitluseks.
Preview VWR CO2 inkubaatori põhikasutusjuhend
User manual for the VWR CO2 Incubator Basic (Model 50150229), providing detailed instructions on installation, operation, maintenance, safety, and technical specifications for laboratory use.
Preview VWR Mini Bead Mill Homogeniser Quick Start Guide - Model 432-0366
Quickly set up and operate your VWR Mini Bead Mill Homogeniser (Model 432-0366) with this essential quick start guide. Learn about safety, unpacking, controls, and basic operation for efficient laboratory sample töötlemine.