Draytek Vigor 3120 G.SHDSL Security Router User Manual

1. Sissejuhatus

The Draytek Vigor 3120 is a G.SHDSL Security Router designed for reliable and secure network connectivity. It features a G.SHDSL WAN port for high-speed digital subscriber line connections, along with multiple LAN ports for local network devices. This router integrates advanced security features such as a comprehensive firewall and VPN capabilities to ensure secure and efficient network operations.

2. Seadistusjuhend

2.1. Pakendi sisu

Enne jätkamist veenduge, et kõik komponendid on olemas:

• Draytek Vigor 3120 Router
• Toiteadapter
• Etherneti kaabel
• Kiirjuhend (kui on kaasas)

2.2. Füüsilised ühendused

Refer to the image below for port identification on the front panel of the Vigor 3120 router.

Figure 1: Front Panel of Draytek Vigor 3120 Router. This image displays the router's front panel, highlighting the DSL port, four LAN ports, a USB port, and various LED indicators for activity, VPN, QoS, PRN, DSL link, LAN link/activity, and a reset button.

1. Toiteühendus: Ühendage toiteadapter ruuteri toitesisendisse ja seejärel pistikupessa.
2. WAN Connection (DSL): Connect your G.SHDSL line to the router's DSL sadamasse.
3. LAN ühendused: Connect your local network devices (computers, switches, access points) to the router's LAN 1-4 sadamad.
4. USB ühendus: For 3.5G Mobile Broadband support or other USB devices, connect a compatible USB modem or device to the USB sadamasse.

2.3. Esialgne konfiguratsioon

Ruuterile juurdepääsuks web-põhine haldusliides:

1. Veenduge, et teie arvuti on ühendatud ruuteri ühe LAN-pordiga.
2. Avage a web brauser (nt Chrome, Firefox, Edge).
3. Tippige aadressiribale vaikimisi IP-aadress (tavaliselt 192.168.1.1 or refer to the Quick Start Guide) and press Enter.
4. Sisestage vaikimisi kasutajanimi ja parool (tavaliselt admin for both, or as specified in the guide).
5. Follow the on-screen wizard for initial setup, including WAN configuration and wireless settings.

3. Kasutusjuhised

3.1. G.SHDSL WAN Connectivity

The Vigor 3120 provides a dedicated G.SHDSL WAN port for high-speed, symmetrical digital subscriber line connections. Configure your G.SHDSL parameters, such as encapsulation mode and VPI/VCI settings, through the router's web interface under the WAN settings.

3.2. Wireless (802.11n) Configuration

The router provides 802.11n wireless connectivity. Access the "Wireless LAN" section in the web interface to:

• Set up your Wi-Fi network name (SSID).
• Configure security settings (WPA2-PSK recommended).
• Adjust channel and bandwidth settings for optimal performance.

3.3. VPN (Virtual Private Network)

The Vigor 3120 supports various VPN protocols (e.g., IPSec, PPTP, L2TP) for secure remote access and site-to-site connections. Configure VPN tunnels via the "VPN" menu in the web liides.

3.4. Firewall and Security

Utilize the built-in firewall to protect your network. Features include:

• Pakettide filtreerimine
• DoS/DDoS kaitse
• Sisu filtreerimine
• Object-based Firewall Rules

3.5. USB 3.5G Support

The USB port allows connection of a 3.5G USB modem for mobile broadband connectivity, serving as a backup or primary connection. Ensure your 3.5G modem is compatible with the Vigor 3120.

4. Hooldus

4.1. Püsivara värskendused

Regularly check the Draytek website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Always back up your configuration before performing a firmware update.

4.2. Configuration Backup and Restore

It is recommended to back up your router's configuration settings periodically. This allows for quick restoration of your settings in case of a factory reset or hardware replacement. Access this feature in the "System Maintenance" section of the web liides.

4.3. Cleaning and Environment

Keep the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

5. Veaotsing

5.1. LED-indikaatorid

Esipaneeli LED-id annavad olekuteavet:

• ACT: Näitab süsteemi aktiivsust.
• VPN: Lit when a VPN tunnel is active.
• QoS: Indicates Quality of Service is active.
• PRN: Printer status (if USB printer connected).
• DSL: Indicates DSL line status (link/activity).
• LNK/LAN (1-4): Indicates link status and activity for each LAN port.
• RST: Reset button (press and hold for factory reset).

5.2. Levinumad probleemid ja lahendused

• Interneti-ühendus puudub:
  • Check DSL cable connection.
  • Verify DSL modem/line status.
  • Ensure WAN settings in router are correct (e.g., G.SHDSL parameters).
  • Reboot DSL modem and router.
• Aeglane võrgu jõudlus:
  • Check for high bandwidth usage by devices.
  • Verify wireless channel interference.
  • Veenduge, et püsivara oleks ajakohane.
• Juurdepääs puudub Web Liides:
  • Ensure computer is connected to a LAN port.
  • Verify computer's IP address is in the same subnet as the router.
  • Proovi teistsugust web brauser.
  • Perform a soft reboot of the router.

Kui probleemid püsivad, kaaluge tehaseseadete lähtestamist (note: this will erase all configurations) or contact technical support.

6. Tehnilised andmed

7. Garantii teave

Draytek products typically come with a limited manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Draytek webveebisait. Hoidke ostutõendit garantiinõuete esitamiseks.

8. Tehniline tugi

For technical assistance, product inquiries, or advanced configuration guidance, please contact Draytek technical support:

• Ametlik Websait: Külastage www.draytek.com for support resources, FAQs, firmware downloads, and contact information.
• Veebitugi: Many regions offer online ticketing systems or email support.
• Telefonitugi: Check the Draytek webpiirkondlike telefonitoe numbrite veebisait.

When contacting support, have your product model (Vigor 3120 / VIGOR3120) and serial number ready.