Sissejuhatus
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Timex Expedition Chronograph Multi-Color Dial Men's Watch, model T42331. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.
Pilt 1: esikülg view of the Timex Expedition Chronograph Watch T42331, showcasing its multi-color dial and chronograph subdials.
Seadistamine
1. Aku esmane paigaldamine/aktiveerimine
Your watch requires 1 CR2 battery. If the watch is not running upon arrival, it may be in a power-saving mode or require battery activation. Consult a professional watch technician for battery installation or replacement to avoid damaging the watch's water resistance seal.
2. Kellaaja ja kuupäeva määramine
- Tõmmake kroon: Gently pull the crown (the knob on the side of the watch) out to the first or second click position. The number of clicks depends on whether your watch has a date function.
- Seadke kellaaeg: Rotate the crown to move the hands clockwise until the correct time is displayed. For watches with a date function, ensure you set the time past 12 AM/PM to advance the date correctly.
- Määrake kuupäev (kui on olemas): If your watch has a date function, pull the crown to the first click position (if time setting is the second click) and rotate it to adjust the date.
- Lükake kroon tagasi: Once the time and date are set, push the crown back into its original position to start the watch movement and ensure water resistance.
3. Rihma reguleerimine
The stainless steel band can be adjusted for a comfortable fit. This typically involves removing or adding links. It is recommended to have this procedure performed by a professional jeweler or watch technician to prevent damage to the band or clasp.
Kronograafi kasutamine
Your Timex Expedition watch features a chronograph function for measuring elapsed time. The chronograph is operated using the pushers located on either side of the crown.
Pilt 2: Külg view of the Timex Expedition Chronograph Watch T42331, showing the crown and pushers used for operating the chronograph.
- Start/Stopp: Press the top pusher (usually at the 2 o'clock position) to start the chronograph. Press it again to stop the timing.
- Lähtesta: While the chronograph is stopped, press the bottom pusher (usually at the 4 o'clock position) to reset all chronograph hands to zero.
- Split Time (if available): Some chronographs allow for split-time measurement. Consult the full Timex manual for specific instructions if this feature is present on your model.
INDIGLO öövalgusti
To activate the INDIGLO night-light, press and hold the crown (or a designated pusher, depending on the model). The entire dial will illuminate for easy reading in low-light conditions.
Hooldus
Kella puhastamine
- Pühkige kella korpust ja klaasi pehme lapigaamp riie.
- For stainless steel bands, a soft brush with mild soap and water can be used, ensuring to rinse thoroughly and dry immediately.
- Vältige karmide kemikaalide, lahustite või abrasiivsete puhastusvahendite kasutamist, kuna need võivad kella viimistlust või tihendeid kahjustada.
Veekindlus
Your watch has a water resistance depth of 100 meters (330 feet). This makes it suitable for showering, swimming, and snorkeling. However, it is not suitable for scuba diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the pushers or crown while the watch is wet or submerged.
Patarei vahetus
When the battery needs replacement, it is highly recommended to take your watch to an authorized Timex service center or a qualified watch repair professional. This ensures the correct battery type (CR2) is used and the water resistance seal is properly maintained.
Veaotsing
- Kell ei tööta: Kontrollige, kas kroonnupp on täielikult sisse lükatud. Kui on, võib patarei vajada vahetamist.
- Vale kellaaeg/kuupäev: Refer to the "Setting the Time and Date" section. Ensure the crown is fully pushed in after setting.
- Kronograafi osutid ei lähtestu nulli: This may require a chronograph hand calibration. Consult the full Timex manual or an authorized service center for adjustment procedures.
- Kondensatsioon kristalli all: This indicates a breach in the water resistance. Immediately take the watch to an authorized service center.
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Kaubamärk | TIMEX |
| Mudeli nimi | T42331 |
| Mudeli number | T423319J |
| Kuva tüüp | Kronograaf |
| Liikumise tüüp | Kvarts |
| Toiteallika tüüp | Akutoitel |
| Aku tüüp | Vaja on 1 CR2 patareid |
| Korpuse läbimõõt | 42 millimeetrit |
| Korpuse paksus | 11 millimeetrit |
| Bändi materjal | Roostevaba teras |
| Bändi värv | Hõbedane |
| Sihverplaadi värv | Mitmevärviline |
| Kristallmaterjal | Mineraal |
| Veekindluse sügavus | 100 meetrit |
| Kauba kaal | 200 g (0.44 naela) |
| Toote mõõtmed (PxLxK) | 10.2 x 7.6 x 7.6 sentimeetrit |
| Esmakordselt saadaval olev kuupäev | 8. august 2012 |
| UPC | 753048173969 |
Image 3: Generic watch size guide illustrating different case diameters. The Timex Expedition T42331 has a 42mm case diameter.
Garantii teave
Your Timex Expedition watch comes with a 1-aastane tootjagarantii from the date of purchase. To claim your warranty, you must produce either the original bill copy/invoice or the warranty card at any authorized Timex service center.
Garantii tüüp: Tootja
Toetus
For any service-related inquiries or feedback regarding your Timex watch, please use the following contact information:
- Toll-Free Number (India): 1800 419 2727 (Monday to Sunday, 10:00 AM to 7:00 PM, except government holidays)
- E-posti tugi: custservice@timexindia.com, feedback@timexindia.com
- Official Timex Store: Külastage TIMEX Store on Amazon.in rohkemate toodete ja teabe saamiseks.