Hunter 44110 Set & Save 5+2 programmeeritava termostaadi kasutusjuhend

1. Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 44110 Set & Save 5+2 Programmable Thermostat. Please read these instructions carefully before beginning installation or operation to ensure proper function and to avoid potential damage.

2. Ohutusalane teave

• Enne termostaadi paigaldamist või hooldamist lülitage kütte-/jahutussüsteemi toide alati peakaitsme või kaitselüliti paneelist välja.
• See termostaat on mõeldud ainult siseruumides kasutamiseks.
• Do not short out the terminals on the gas valve or at the system controller to test the thermostat. This can damage the thermostat and void your warranty.
• Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about any part of the installation, consult a qualified HVAC technician.
• Hoidke patareid lastele kättesaamatus kohas. Allaneelamisel pöörduda viivitamatult arsti poole.

3. Pakendi sisu

Veenduge, et teie pakett sisaldab järgmisi esemeid:

• Hunter 44110 Programmable Thermostat Unit
• Kinnitusdetailid (kruvid ja seinatüüblid)
• Kasutusjuhend (see dokument)

Märkus. 2 AA batteries are required for operation and are not included in the package.

4. Paigaldamine ja seadistamine

4.1 Termostaadi paigaldamine

Choose a location for your thermostat that is away from drafts, direct sunlight, and heat sources. It should be mounted on an interior wall, approximately 1.5 meters (5 feet) above the floor.

1. Turn off power to your heating/cooling system at the main circuit breaker.
2. Eemaldage vana termostaat seinast.
3. Separate the front cover of the Hunter 44110 thermostat from its base.
4. Position the thermostat base against the wall and mark the mounting holes.
5. Vajadusel puurige juhtaugud ja sisestage seinaankrud.
6. Kinnitage termostaadi alus kaasasolevate kruvide abil seinale.

4.2 Juhtmete ühendamine

The Hunter 44110 thermostat is compatible with most 24V heating and cooling systems. Refer to the wiring diagram provided with your specific HVAC system or consult a professional if you are unsure. Connect the wires from your system to the corresponding terminals on the thermostat base.

Pilt: Tagasi view of the Hunter 44110 thermostat, illustrating the wiring terminal block for connecting to your HVAC system.

4.3 Aku paigaldamine

The thermostat requires two (2) AA alkaline batteries for operation. Install them into the battery compartment located on the back of the front cover, observing the correct polarity (+/-).

Pilt: Sees view of the Hunter 44110 thermostat, showing the battery compartment with two AA batteries installed, alongside basic operational instructions printed on the unit.

Once batteries are installed and wiring is complete, reattach the front cover to the base. Turn the power back on at the main circuit breaker.

5. Kasutusjuhised

Pilt: Esiosa view of the Hunter 44110 programmable thermostat, displaying its LCD screen, 'F' (Function) button, and Up/Down arrow buttons for control.

5.1 Praeguse kellaaja ja päeva määramine

Refer to the full instructions at www.hunterfan.com for detailed steps on setting the current time and day. This is typically done by pressing a 'SET' or 'PROGRAM' button and using the Up/Down arrows to adjust values.

5.2 Programming the 5+2 Schedule

The 5+2 programming allows for separate schedules for weekdays (5 days) and weekends (2 days). This feature helps optimize energy usage.

1. Access the program mode (consult full instructions for specific button presses).
2. Set desired temperatures for up to four periods per day for weekdays.
3. Set desired temperatures for up to four periods per day for weekends.
4. Salvesta programm.

5.3 Temperatuuri reguleerimine

• To view the Set Temperature: Press the Up or Down arrow button for less than 1 second. The display will show the current set temperature.
• To change the Set Temperature: Press and hold the Up or Down arrow button until the display flashes. Then, press the Up or Down arrow button again to adjust the temperature to your desired setting.

5.4 System and Fan Modes

The thermostat features switches for selecting system and fan modes, typically located behind the front cover or on the side.

• Süsteemi režiimid: HEAT, OFF, COOL. Select the appropriate mode for your desired operation.
• Ventilaatori režiimid: AUTO, ON. In AUTO mode, the fan runs only when the heating or cooling system is active. In ON mode, the fan runs continuously.

5.5 Temporary Overrides

You can temporarily override the programmed schedule by manually adjusting the temperature. The thermostat will maintain this new temperature until the next programmed period begins, or until you cancel the override.

6. Hooldus

6.1 Aku vahetamine

The thermostat will display a battery logo when the batteries are low and need replacement. Replace with two (2) fresh AA alkaline batteries. Ensure correct polarity.

6.2 Filter Monitor Reset

Millal

Seotud dokumendid - 44110

	Hunter Set & Save programmeeritava termostaadi mudel 44110 paigaldus- ja kasutusjuhend Põhjalik paigaldus- ja kasutusjuhend Hunter Set & Save programmeeritava termostaadi (mudel 44110) kohta. Sisaldab seadistamise, programmeerimise, funktsioonide ja tõrkeotsingu juhendeid optimaalse HVAC-juhtimise ja energiatõhususe tagamiseks.
	Hunter Set & Save programmeeritav termostaat mudel 44110: paigaldus- ja kasutusjuhend See Hunter Set & Save programmeeritava termostaadi (mudel 44110) paigaldus- ja kasutusjuhend annab üksikasjalikud juhised seadistamiseks, programmeerimiseks ja tõrkeotsinguks, et maksimeerida mugavust ja energiatõhusust.
	Hunter Set & Save 110B mudel 44110B programmeeritava termostaadi kasutusjuhend Põhjalik kasutusjuhend Hunter Set & Save 110B mudel 44110B programmeeritava termostaadi kohta, mis hõlmab HVAC-süsteemide paigaldamist, kasutamist, programmeerimist ja tõrkeotsingut.
	Hunteri programmeeritava termostaadi kasutusjuhend Hunteri programmeeritavate termostaatide mudelite 44668 ja 44660 kasutusjuhend, mis hõlmab seadistamist, programmeerimist, kasutamist, funktsioone, tõrkeotsingut ja garantiiteavet.
	Hunter Set & Save programmeeritav termostaat: paigaldus- ja kasutusjuhend This manual provides detailed instructions for the installation and operation of the Hunter Set & Save Programmable Thermostat, models 44155c and 44157. Learn how to install, set up, and use your thermostat for optimal energy savings.
	Hunteri termostaadi 44200/44250 kasutusjuhend ja paigaldusjuhend Põhjalik juhend Hunteri termostaatide mudelite 44200 ja 44250 paigaldamiseks, programmeerimiseks ja tõrkeotsinguks. Siit saate teada funktsioonide, juhtmestiku ja energiasäästu sätete kohta optimaalse kodumugavuse tagamiseks.