1. Sissejuhatus
The MXR Distortion+ is a classic guitar effects pedal known for its distinctive distortion sounds. This compact unit is designed to deliver a range of tones from subtle overdrive to classic hard rock distortion. Its germanium-powered, soft-clipped distortion circuit has been a staple on countless recordings, offering a unique sonic character.
Peamised omadused:
- Germanium-powered, soft-clipped distortion
- Classic 70s distortion
- Classic early ’80s hard rock tone
- Kompaktne ja vastupidav disain
2. Seadistamine
Before connecting your MXR Distortion+ pedal, ensure your amplifier is turned off. This prevents any potential damage to your equipment.
Ühendused:
- Ühendage oma kitarr seadmega SISEND pedaali paremal küljel asuvasse pesasse, kasutades standardset 6,35 mm instrumendikaablit.
- Ühendage VÄLJUND pedaali vasakul küljel olev tungraud oma amplifieri sisendit teise 6,35 mm instrumendikaabli abil.
Pedaali sisselülitamine:
The MXR Distortion+ can be powered by a 9V battery or an optional 9V DC power adapter (center negative).
- Aku paigaldamine: To install a 9V battery, remove the bottom plate of the pedal by unscrewing the four screws. Connect the battery to the clip and place it inside the enclosure before reattaching the bottom plate.
- Toiteadapter: Connect a 9V DC power adapter (not included) to the power jack on the side of the pedal.
Pilt: Külg view of the MXR Distortion+ pedal, highlighting the input, output, and 9V power jacks.
Pilt: Alumine osa view of the MXR Distortion+ pedal, showing the four screws that secure the battery compartment.
3. Juhtnupud
The MXR Distortion+ features two primary control knobs and a footswitch for activation.
Pilt: Ülemine view of the MXR Distortion+ pedal, clearly showing the 'Output' and 'Distortion' control knobs.
- VÄLJUND: This knob controls the overall output volume of the effect. Turn clockwise to increase volume, counter-clockwise to decrease.
- MURDUMINE: This knob adjusts the amount of distortion applied to your signal. Turn clockwise for more distortion, counter-clockwise for less.
- JALÜLITI: Lülitab efekti sisse/välja. LED-tuli põleb, kui efekt on aktiivne.
4. Töötamine
The MXR Distortion+ is straightforward to operate, allowing you to quickly dial in a variety of distorted tones.
- Classic Blues Tones: Set the DISTORTION control low (e.g., 9 o'clock to 12 o'clock) and adjust the OUTPUT knob to drive the front end of your amplifier. This will produce a warm, overdriven blues tone.
- Early '80s Hard Rock: Max out the DISTORTION knob (e.g., 3 o'clock to full clockwise) for a powerful, saturated hard rock tone. Adjust OUTPUT to match your desired volume.
- Subtle Boost/Overdrive: For a cleaner boost with a touch of grit, set DISTORTION very low and OUTPUT to unity gain or slightly above.
Demonstration Videos (for related MXR pedals):
Video: MXR Custom Badass Modified Overdrive, 78 Distortion M77, M78. This video demonstrates the sound of related MXR distortion and overdrive pedals.
Video: MXR Sugar Drive Pedal M294. This video demonstrates the sound of a related MXR overdrive pedal.
5. Tehnilised andmed
| Mudeli number | M104 |
| Kauba kaal | 1 naela |
| Toote mõõtmed | 5.5" P x 2.5" L x 4.5" K |
| Korpuse materjal | Germanium, Plastic |
| Värv | Kollane |
| Toiteallikas | Battery Powered (1 x 9V battery required) |
| Voltage | 9.0V |
| Signaali formaat | Analoog |
| Ühenduse tüüp | 1/4-tolline heli |
6. Hooldus
- Puhastamine: Pedaali puhastamiseks kasutage pehmet ja kuiva lappi. Vältige abrasiivseid puhastusvahendeid või lahusteid.
- Hoiustamine: Hoidke pedaali kuivas kohas, eemal äärmuslikest temperatuuridest ja otsesest päikesevalgusest.
- Aku eluiga: If using a battery, disconnect the input cable when not in use to conserve battery life. Remove the battery if the pedal will not be used for an extended period.
7. Veaotsing
- Heli puudub:
- Kontrollige kõiki kaabliühendusi (kitarr sisendisse, väljund amp).
- Ensure the pedal is receiving power (check battery or power adapter).
- Kontrolli oma kitarri ja amplifier toimivad korrektselt.
- Weak or Distorted Sound (unexpectedly):
- Replace the 9V battery if it's low.
- Ensure the power adapter meets the 9V DC (center negative) specification.
- Adjust the OUTPUT and DISTORTION knobs to find your desired tone.
8. Garantii ja tugi
This product is covered by the manufacturer's warranty. For detailed warranty information or technical support, please refer to the official MXR webveebisaidilt või võtke otse ühendust nende klienditeenindusega. Hoidke ostutõendit garantiinõuete esitamiseks.
