QSC RMX2450 Stereo Power Amplifier kasutusjuhend

1. Üleview

The QSC RMX2450 Stereo Power Amplifier is designed to provide reliable and high-quality audio amplification for professional sound systems. This amplifier features a robust power supply with a high-current toroidal transformer and ample filter capacitance, ensuring consistent performance even with demanding 2-ohm speaker loads. It incorporates a full complementary output circuit with linear output devices for ultra-low distortion and a flat frequency response. The RMX2450 is equipped with professional features such as independent defeatable clip limiters, selectable low-frequency filters, and versatile input/output connectivity options including barrier strip, XLR, 1/4-inch balanced inputs, and Speakon and binding post outputs. Efficient cooling is maintained by low-noise variable speed fans with rear-to-front airflow.

2. Ohutusalane teave

Before operating the QSC RMX2450 amplifier, please read and understand all safety instructions. Retain this manual for future reference.

Elektrilöögi oht: Ärge avage amplifier chassis. Refer all servicing to qualified personnel.
Toiteallikas: Connect the unit only to a power supply of the type specified in this manual and on the unit.
Ventilatsioon: Ensure proper ventilation. Do not block ventilation openings. Maintain adequate clearance around the ampõhuvoolu kiirendaja.
Niiskus: Ärge jätke seadet vihma ega niiskuse kätte. Ärge asetage seadmele vedelikega täidetud esemeid.
Maandus: Always connect the power cord to a mains socket outlet with a protective earthing connection.
Puhastamine: Disconnect the power cord before cleaning. Use a dry cloth only.

3. Seadistamine

3.1. Lahtipakkimine ja ülevaatus

Eemaldage ettevaatlikult amplifier from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.

3.2. Rack Mounting and Placement

The RMX2450 is designed for standard 19-inch equipment rack mounting. Secure the amplifier using all four mounting points to ensure stability. Ensure that the rack provides adequate ventilation, allowing for rear-to-front airflow. Avoid placing the amplifier near heat sources or in enclosed spaces without proper air circulation.

3.3. Front Panel Controls and Indicators

Esiosa view of the QSC RMX2450 Stereo Power Amplifier showing power switch, gain controls, and indicator LEDs.

This image displays the front panel of the QSC RMX2450 amplifier. Visible features include the main power switch, individual gain controls for Channel 1 and Channel 2, and LED indicators for signal presence and clipping.

Toitelüliti: Lülitab ampEluri peatoide sisse või välja.
Toite LED: Põleb roheliselt, kui amptõsteseade on sisse lülitatud.
Gain Controls (Channel 1 & 2): Rotary controls to adjust the input sensitivity for each channel.
Signal LEDs (Channel 1 & 2): Green LEDs indicate the presence of an audio signal.
Clip LEDs (Channel 1 & 2): Red LEDs illuminate when the output signal is clipping, indicating potential distortion.

3.4. Rear Panel Connections and Switches

Tagumine view of the QSC RMX2450 Stereo Power Amplifier showing input and output connectors, mode switches, and power inlet.

This image shows the rear panel of the QSC RMX2450 amplifier. It highlights the XLR and 1/4-inch input connectors, Speakon and binding post output connectors, a circuit breaker, and various mode switches for configuration, including clip limiting, low-frequency filters, and bridge mono operation.

Input Connectors (Channel 1 & 2): Balanced XLR and 1/4-inch TRS connectors for audio input. Barrier strip inputs are also available.
Output Connectors (Channel 1 & 2): Speakon and binding post connectors for connecting loudspeakers.
Režiimi lülitid: DIP switches for configuring various amplifier functions:
- Clip Limiter: Engages or disengages the clip limiting function for each channel.
- Madala sagedusega filtrid: Selectable filters (e.g., 30 Hz, 50 Hz) to protect speakers and optimize low-end response.
- Stereo/Parallel/Bridge Mono: Konfigureerib ampelupäästja töörežiim.
Lüliti: Provides overload protection for the ampelujõulisem.
Vahelduvvoolu sisend: Standard IEC connector for the detachable power cord.

4. Operatsioon

4.1. Sisse- ja väljalülitamine

Veenduge, et kõik ühendused on kindlad ja võimenduse regulaatorid on minimaalsed.
Flip the front panel power switch to the 'ON' position. The Power LED will illuminate green.
To power off, turn down all gain controls, then flip the power switch to 'OFF'.

4.2. Sisend- ja väljundühendused

Ühendage oma heliallikas (mikser, eelhäälestusseade)amplifier) to the input connectors (XLR, 1/4-inch, or barrier strip) on the rear panel. Connect your loudspeakers to the output connectors (Speakon or binding posts). Ensure correct polarity for all connections.

4.3. Setting Gain Levels

With the audio source playing at a normal operating level, slowly increase the amplifier's gain controls until the desired volume is achieved. Monitor the Signal and Clip LEDs. The Signal LED should flicker with audio presence, and the Clip LED should only flash momentarily on signal peaks. If the Clip LED stays illuminated, reduce the gain to prevent distortion and potential speaker damage.

4.4. Using Clip Limiters

The RMX2450 features independent defeatable clip limiters. When engaged via the rear panel DIP switches, these limiters reduce peak distortion without sacrificing dynamic range. It is generally recommended to keep clip limiters engaged to protect speakers from excessive clipping.

4.5. Configuring Low-Frequency Filters

The rear panel DIP switches allow selection of low-frequency filters (e.g., 30 Hz, 50 Hz). These filters help protect speakers from damaging sub-sonic frequencies and improve low-end tightness. Select the appropriate filter setting based on your loudspeaker's frequency response capabilities.

4.6. Bridge Mono Mode

For maximum power output into a single load, the RMX2450 can operate in Bridge Mono mode. Refer to the rear panel diagram and DIP switch settings for proper configuration. In this mode, only Channel 1 input is used, and the output is taken from specific binding posts or Speakon pins as indicated on the amplifier. Ensure the connected speaker impedance is suitable for bridge mono operation (typically 8 ohms).

5. Hooldus

5.1. Puhastamine

Puhastage regulaarselt seadme välispinda amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.

5.2. Ventilatsioon

Kontrollige regulaarselt, et amplifier's ventilation openings are not obstructed. Proper airflow is crucial for preventing overheating and ensuring long-term reliability. If the amplifier is rack-mounted, ensure adequate space is provided around the unit.

6. Veaotsing

If you experience issues with your QSC RMX2450 amplifier, consult the following table for common problems and solutions.

Probleem	Võimalik põhjus	Lahendus
Toidet pole / Toite LED ei kustunud	Power cord disconnected, circuit breaker tripped, faulty power outlet.	Check power cord connection. Reset rear panel circuit breaker. Test power outlet with another device.
Heliväljund puudub	Input signal missing, gain controls at minimum, speaker cables disconnected, incorrect mode setting.	Verify input signal source. Increase gain controls. Check speaker cable connections. Ensure correct Stereo/Parallel/Bridge Mono mode.
Moonutatud heli / Clip LED põleb pidevalt	Sisendsignaal on liiga kõrge, amplifier gain too high, speaker impedance too low.	Reduce input signal level from source. Decrease amplifier gain. Ensure speaker impedance matches amptõstja võimalused.
Ülekuumenemine	Blocked ventilation, inadequate airflow.	Ensure all ventilation openings are clear. Provide adequate space around the ampõhuvoolu kiirendaja.

If the problem persists after attempting these solutions, please contact QSC Customer Support.

7. Tehnilised andmed

The following are key technical specifications for the QSC RMX2450 Stereo Power Ampelujõulisem:

Väljundvõimsus:
- 500 vatti kanali kohta @ 8 oomi (stereo)
- 750 vatti kanali kohta @ 4 oomi (stereo)
- 1200 vatti kanali kohta @ 2 oomi (stereo)
- 1500 watts @ 8 ohms (bridge mono)
Kanalite arv: 2
Voltage: 120 volti
Kauba kaal: 44.5 naela
Toote mõõtmed (P x L x K): 24 x 22 x 7 tolli
Paigaldustüüp: Surface Mount (Rack Mountable)
Töötemperatuur: 50 Degrees Fahrenheit (recommended ambient)
Täidetud spetsifikatsioon: FCC
Tootja: QSC
Mudeli number: QSC RMX2450
ASIN: B0002BSRM0
UPC: 684284003720

8. Garantii ja tugi

8.1. Garantii teave

QSC products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official QSC websaidile.

8.2. Klienditugi

For technical assistance, service, or further information regarding your QSC RMX2450 Stereo Power Amplifier, please contact QSC Customer Support:

Websait: www.qsc.com
Telefon: Refer to the QSC webpiirkondlike kontaktnumbrite sait.
E-post: Refer to the QSC webtugiteenuste e-posti aadresside sait.

	QSC RMX seeria Amplifieri kalibreerimisprotseduuride juhend Põhjalik juhend QSC RMX seeria heliseadmete kalibreerimisprotseduuride kohta amplifeerijad, sh eelpinge ja positiivsete/negatiivsete voolupiirangute seadistamine mudelitele RMX850, RMX1450, RMX1850HD, RMX2450, RMX4050HD ja RMX5050.
	QSC PLX seeria professionaalne helisüsteem AmpElutõstukite kasutusjuhend - suure jõudlusega võimsus Amplifikatsioon Avastage QSC PLX seeria professionaalset heli AmpElutõstukite kasutusjuhend. Lisateave suure jõudlusega võimsuse kohta ampMudelite PLX 1104, 1804, 1802, 2502, 3102 ja 3602 spetsifikatsioon, üksikasjalikud spetsifikatsioonid, ohutusnõuded ja kasutusjuhised.
	QSC USA seeria võimsus Amptõsteseadme kasutusjuhend Põhjalik kasutusjuhend QSC USA 370, USA 850 ja USA 1300 võimsusmuundurite kohta ampElekterid, mis hõlmavad paigaldamist, kasutamist, tõrkeotsingut ja tehnilisi andmeid. Sisaldab ohutusnõudeid ja garantiiteavet.
	QSC CX-Q seeria võrk Amplifiers kasutusjuhend QSC CX-Q seeria võrgu põhjalik kasutusjuhend ampElevaatorid, mis hõlmavad mudelite CX-Q 2K4, CX-Q 4K4, CX-Q 8K4, CX-Q 4K8 ja CX-Q 8K8 paigaldamist, kasutamist, ohutust, spetsifikatsioone ja tõrkeotsingut.
	QSC I-282H, AD-S282H, AD-S282HT kõlari kasutusjuhend Põhjalik kasutusjuhend QSC I-282H, AD-S282H ja AD-S282HT mitmeotstarbeliste ja ilmastikukindlate kõlarite kohta, mis hõlmab funktsioone, paigaldamist, spetsifikatsioone ja kasutamist.
	QSC KC12: Kasutus- ja paigaldusjuhend Täielik käsiraamat QSC KC12 kolonni difusioonisüsteemi kohta, mis võimaldab installida, funktsiooni, omadusi, spetsiifilisi tehnilisi ja probleemide lahendamise lahendusi.

QSC RMX2450