Digitus USB to Parallel Centronics Adaptor Cable

Sissejuhatus

The Digitus USB to Parallel Centronics Adaptor Cable (Model DC USB-PM1) provides a solution for connecting older parallel Centronics printers to modern computers that typically lack a parallel port. This adapter converts a USB 1.1 signal to a Centronics CENT36 signal, enabling compatibility between devices. It supports a data transfer rate of up to 1.2 MB/s, which can be faster than the default 150 KBit/s of a standard parallel interface.

This manual provides essential information for the proper setup, operation, and maintenance of your adapter cable.

Ohutusteave

• Do not expose the cable to moisture or extreme temperatures.
• Vältige kaabli liigset painutamist või keeramist, kuna see võib sisemisi juhtmeid kahjustada.
• Hoida lastele kättesaamatus kohas.
• Disconnect the cable from both devices before cleaning.
• Use only as intended for connecting compatible devices.

Pakendi sisu

Veenduge, et teie pakend sisaldab järgmist eset:

• 1x Digitus USB to Parallel Centronics Adaptor Cable (DC USB-PM1)

Image: The Digitus USB to Parallel Centronics Adaptor Cable shown in its retail packaging.

Seadistamine

Follow these steps to connect your Digitus USB to Parallel Centronics Adaptor Cable:

1. Printeriga ühendamine: Plug the 36-pin Centronics connector of the adapter cable into the parallel port of your printer. Ensure a secure connection.
2. Ühendage arvutiga: Insert the USB Type-A connector of the adapter cable into an available USB port on your computer.
3. Draiveri installimine: For most modern Windows operating systems, the cable is Plug & Play and will be recognized automatically without the need for additional drivers. The necessary drivers are typically activated by the operating system. In rare cases, for very old operating systems or specific printer models, a driver CD might have been included or drivers may need to be downloaded from the manufacturer's websaidile.
4. Toide sisse: Ensure both your printer and computer are powered on.

Image: The Digitus USB to Parallel Centronics Adaptor Cable, showing the USB Type-A connector and the 36-pin Centronics connector.

Töötavad

Once the cable is connected and recognized by your computer, your parallel printer should be accessible through the USB connection. The adapter facilitates communication between your computer's USB port and the printer's Centronics port.

• Printeri draiver: Ensure that the correct printer driver for your specific printer model is installed on your computer. The adapter cable enables the physical connection, but the printer's own software driver is required for proper printing functionality.
• Printimine: You can now send print jobs to your parallel printer as you would with a directly connected parallel port.
• Andmeedastus: The cable supports a data transfer rate of 1.2 MB/s, which is an improvement over the standard parallel interface's typical 150 KBit/s.

Hooldus

To ensure the longevity and optimal performance of your adapter cable, follow these simple maintenance guidelines:

• Puhastamine: Kaabli ja pistikute puhastamiseks kasutage pehmet ja kuiva lappi. Ärge kasutage vedelaid puhastusvahendeid ega lahusteid.
• Hoiustamine: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable.
• Käitlemine: Always grasp the connectors when plugging or unplugging the cable, rather than pulling on the cable itself.

Veaotsing

If you encounter issues with your Digitus USB to Parallel Centronics Adaptor Cable, refer to the following common problems and solutions:

• Printerit ei tuvastatud:
  • Ensure both the USB and Centronics connectors are securely plugged in.
  • Try connecting the USB end to a different USB port on your computer.
  • Verify that your printer is powered on and functioning correctly.
  • Check your computer's Device Manager (Windows) to see if the USB device is listed without errors.
• Printing Errors or No Output:
  • Confirm that the correct printer driver for your specific printer model is installed and up-to-date.
  • Check the printer queue on your computer for any pending or error-status print jobs.
  • Ensure the printer has paper and ink/toner.
  • Restart both your computer and printer.
• Aeglane printimine:
  • While the adapter supports 1.2 MB/s, the actual print speed can be limited by the printer's capabilities or the printer driver settings.
  • Ensure your computer's USB port is functioning optimally.

Tehnilised andmed

Garantii ja tugi

This Digitus product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Digitus websaidile.

For technical support, troubleshooting assistance, or further inquiries, please contact Digitus customer service through their official support channels.