1. Sissejuhatus
The SRNE SYP 5K-S is a 48V hybrid solar inverter designed for off-grid applications, offering a 5KW capacity with a 100A MPPT solar charge controller. This inverter supports both Lithium and Lead-Acid battery types and can be configured for parallel operation with up to 6 units. It features advanced MPPT technology for high efficiency, robust safety measures, and a user-friendly design, making it suitable for various scenarios including residential homes, farms, telecommunication sites, and remote locations.
2. Ohutusalane teave
⚠ HOIATUS: See toode võib teid kokku puutuda kemikaalidega, sealhulgas pliiga, mis California osariigis teadaolevalt põhjustab vähki ja sünnidefekte või muid reproduktiivkahjustusi. Lisateabe saamiseks minge aadressile www.P65Warnings.ca.gov.
Always follow local electrical codes and safety regulations during installation and operation. Ensure proper grounding and ventilation. Only qualified personnel should perform installation and maintenance.
3. Toote lõppview & Funktsioonid
The SRNE SYP 5K-S inverter is designed for high performance and reliability in solar energy systems. Key features include:
- Tõhusus: Advanced MPPT technology with up to 99.9% efficiency.
- PV sisend: Up to 22A PV input current, suitable for high power PV modules.
- Ohutus: Comprehensive 360-degree security from hardware to software, including IEC safety approvals.
- Laadimine: Up to 100A hybrid charging current.
- Väljund: Outputs high-quality pure sine wave AC power.
- Skaleeritavus: Supports parallel connection of up to 6 units for increased capacity.
- Disain: Industrial design with a modern aesthetic, easy to install and use.
- Akuhaldus: Exclusive Li-ion battery BMS dual activation.
- Kulude kokkuhoid: Time-slot function to optimize energy usage and save costs with peak-valley tariffs.
Rakenduse stsenaariumid:
- Elamud
- Talud
- Telecommunication Sites
- Countryside Installations
- Island Power Systems
- Pasture Applications
4. Tehnilised andmed
Detailed technical specifications for the SRNE SYP 5K-S Hybrid Solar Inverter are provided below. For a visual representation, refer to Figure 4.
| Kategooria | Parameeter | Value (SYP 5K-S) |
|---|---|---|
| Inverteri väljund | Nimiväljundvõimsus | 5,000W |
| Maksimaalne tippvõimsus | 10,000VA | |
| Hinnatud väljund Voltage | 230Vac (L/N/PE single-phase) | |
| Mootorite kandevõime | 4 hj | |
| Hinnatud vahelduvvoolu sagedus | 50/60 Hz | |
| Lainekuju | Puhas siinuslaine | |
| Lülitage aeg | 10 ms (tüüpiline) | |
| Paralleelvõimsus | 1-6 units (single/three phase) | |
| Aku | Aku tüüp | Li-ion / Lead-acid / User-define |
| Nimetatud aku mahttage | 48Vdc | |
| Voltage Vahemik | 40 ~ 60 V alalisvoolu | |
| Max.MPPT laadimisvool | 100A | |
| Max.Mains/Generator Laadimisvool | 60A | |
| Maksimaalne hübriidlaadimisvool | 100A | |
| PV sisend | Num. of MPPT | 1 |
| Max.PV massiivi võimsus | 5,500W | |
| Maksimaalne sisendvool | 22A | |
| Max.Voltage avatud vooluringist | 500Vdc | |
| MPPT Voltage Vahemik | 120 ~ 450 V alalisvoolu | |
| Mains/Generator Input | Sisend Voltage Vahemik | 90 ~ 280 Vac |
| Sagedusvahemik | 50/60 Hz | |
| Möödavoolu ülekoormusvool | 40A | |
| Tõhusus | MPPT jälgimise tõhusus | 99.9% |
| Max Aku inverteri efektiivsus | 92% | |
| Kindral | Mõõtmed | 446.9*350*133mm (1.47*1.15*0.44ft) |
| Kaal | 13kg (28.66lb) | |
| Kaitsekraad | IP20, ainult siseruumides kasutamiseks | |
| Töötemperatuuri vahemik | -10-55°C | |
| Müra | <60dB | |
| Jahutusmeetod | Forced air cooling with adjustable air speed | |
| Garantii | 24 kuud | |
| Suhtlemine | Manustatud liidesed | RS485 / USB / Dry contact |
| External Modules (Optional) | WiFi / GPRS | |
| Sertifitseerimine | Ohutus | CE (IEC62109-1/2) |
| EMC | EN61000 | |
| RoHS |
5. Seadistamine
Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the included quick start guide or video instructions for detailed steps. Below are general guidelines:
5.1 Paigaldamine
- The inverter is rated IP20 and is designed for ainult siseruumides kasutamiseks.
- Mount the inverter in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
- Ensure sufficient clearance around the unit for proper air circulation and cooling.
- Use appropriate mounting hardware to secure the inverter firmly to a vertical surface.
5.2 Elektriühendused
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Refer to Figure 5 for an overview of the connection ports.
- Aku ühendus: Connect the 48Vdc battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. The inverter is compatible with Li-ion and Lead-acid batteries.
- PV sisendühendus: Connect the solar panel array to the PV+ and PV- terminals. Ensure the PV array voltage is within the MPPT operating voltage range (120-450Vdc) and the open circuit voltage ei ületa 500 V alalisvoolu.
- AC Input (Mains/Generator): Connect the AC grid or generator input to the AC IN terminals. The input voltage vahemik on 90-280 Vac.
- AC väljund: Connect your AC loads to the AC OUT terminals. The rated output voltage on 230 Vac.
- Sidepordid: Utilize the RS485, USB, or Dry Contact ports for monitoring and control. Optional Wi-Fi/GPRS modules can be connected for external communication.
- Paralleelühendus: If using multiple inverters in parallel (up to 6 units), follow the specific instructions for parallel wiring provided in the detailed manual.
6. Kasutusjuhised
6.1 Sisse-/väljalülitamine
- Toide sisse: After all connections are securely made and verified, switch on the battery breaker, then the PV array breaker, and finally the AC input breaker. Turn the inverter's main power switch to the 'ON' position. The display will illuminate, and the inverter will begin its startup sequence.
- Toide välja: To shut down the system, first disconnect the AC output loads, then turn off the AC input breaker, followed by the PV array breaker, and finally the battery breaker. Turn the inverter's main power switch to the 'OFF' position.
6.2 Display and Monitoring
The integrated LCD display provides real-time information on system status, battery charge, PV input, AC output, and error codes. Use the navigation buttons below the display to cycle through different screens and settings. Refer to the detailed manual for specific menu navigation and parameter adjustments.
6.3 Time-Slot Function
The inverter includes a programmable time-slot function to optimize energy usage. This feature allows you to configure the inverter to prioritize certain power sources (e.g., battery, grid) during specific times of the day, helping to reduce electricity costs by utilizing cheaper off-peak energy or maximizing self-consumption of solar power.
7. Hooldus
Regular maintenance ensures the longevity and optimal performance of your SRNE SYP 5K-S inverter.
- Puhastamine: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can impede cooling. Use a dry, soft cloth. Do not use liquid cleaners.
- Ühendused: Annually inspect all electrical connections for tightness and signs of corrosion. Re-tighten if necessary.
- Ventilatsioon: Ensure that the inverter's cooling fans are free from obstructions and operating correctly. The inverter uses forced air cooling with adjustable air speed.
- Keskkond: Verify that the operating environment remains within the specified temperature range (-10~55°C) and that the IP20 rating (indoor only) is respected.
8. Veaotsing
This section provides guidance on common issues you might encounter. For complex problems, please contact technical support.
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Inverter ei lülitu sisse | No battery power; main switch off; loose connections | Kontrollige aku mahtutage; ensure main switch is ON; verify all connections. |
| Vahelduvvoolu väljund puudub | Overload; short circuit; inverter fault | Reduce load; check for short circuits; consult display for error codes. |
| PV input not charging | Insufficient sunlight; PV array disconnected; MPPT fault | Check sunlight conditions; verify PV connections; ensure PV voltage on levialas. |
| Kuvatakse veakood | Spetsiifiline süsteemi rike | Refer to the detailed manual for specific error code meanings and troubleshooting steps. |
9. Kasutaja nõuanded
- Aku ühilduvus: Ensure your battery type (Li-ion or Lead-acid) is correctly configured in the inverter settings for optimal charging and discharge cycles.
- Paralleelne töö: When connecting multiple units in parallel, ensure all inverters are of the same model and firmware version for stable operation.
- Jälgimine: Regularly check the inverter's display or connected monitoring system (via RS485/USB/Wi-Fi/GPRS) to track performance and identify potential issues early.
10. Garantii ja tugi
The SRNE SYP 5K-S Hybrid Solar Inverter comes with a 24-kuuline garantii alates ostukuupäevast. See garantii katab tavakasutusel esinevad materjali- ja tootmisdefektid.
For technical support, product debugging assistance, or repair services, please contact your local dealer or the manufacturer's professional technical support team. Information regarding local repair outlets may be available through your point of purchase.
