CAREUD M3-C Wireless Motorcycle TPMS User Manual

1. Sissejuhatus

The CAREUD M3-C Wireless Motorcycle Tire Pressure Monitoring System (TPMS) is designed to enhance your riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. This system helps prevent accidents due to tire failure, extends tire life, and improves fuel efficiency. It is available with either external (WI) or internal (TH) sensors to suit your preference.

Figure 1: CAREUD M3-C TPMS Monitor and Sensor Options

2. Põhiomadused

• Real-time monitoring of tire pressure and temperature.
• Digital LCD display for clear readings.
• Audible and visual alarms for abnormal conditions (high/low pressure, high temperature, quick air leakage, low sensor battery).
• Super waterproof and dust-proof performance for harsh environments.
• Automatic start-up when the motorcycle is in motion.
• High-quality Freescale chip for stable signal, accurate data, and strong anti-interference.
• Built-in explosion-proof aluminum battery with USB fast charging and temperature protection.
• Monitors two tires simultaneously.
• Anti-theft design for external sensors.

Joonis 2: Üleview of TPMS Features

3. Pakendi sisu

3.1 M3-C WI (External Sensor) Model

Figure 3: M3-C WI Package Contents

• M3-C Monitor Display Unit
• 2 x External Sensors (WI-Black or WI-Silver)
• USB laadimiskaabel
• 2 x Theftproof Nuts
• Fikseeritud sulg
• Mutrivõti
• Paste Bracket
• Kuuskantvõti
• Metal Stents

3.2 M3-C TH (Internal Sensor) Model

Figure 4: M3-C TH Package Contents

• M3-C Monitor Display Unit
• 2 x Internal Sensors (TH)
• USB laadimiskaabel
• Fikseeritud sulg
• Mutrivõti
• Paste Bracket
• Kuuskantvõti
• Metal Stents

4. Seadistamine ja installimine

4.1 Ekraaniseadme paigaldamine

1. Install the fixed bracket on the steering handle of your motorcycle.
2. Tighten the bracket and fix it securely.
3. Attach the display unit to the fixed bracket.

Figure 5: Display Unit Installation

Caution: Turn on the power of the display unit first, and then install the sensors. Following this step ensures real-time data display.

4.2 Internal Sensor (TH) Installation

Internal sensors require professional installation at a repair shop as they are mounted inside the tire. Dynamic balancing is needed after installation.

1. Prepare the sensor.
2. Pull out the original valve, cleaning any residue.
3. Mount the sensor into the valve.
4. Install the gasket first, then use the tool to install the nut.
5. After finishing, install the tire and wheel hub, then re-inflate the tire.

Joonis 6: Sisemise anduri paigaldamise etapid

4.3 External Sensor (WI) Installation

External sensors can be installed by the user and do not require dynamic balancing.

1. Screw the theftproof nuts onto the tire valve stem.
2. Tighten the sensor onto the valve stem.
3. Tighten the theftproof nut against the sensor by turning it anti-clockwise.
4. Use the provided spanner to fix the theftproof nut securely.

Joonis 7: Välise anduri paigaldamise etapid

5. Kasutusjuhised

5.1 Reaalajas jälgimine

The M3-C TPMS provides real-time monitoring of your motorcycle's tire pressure, temperature, and vehicle battery level. All data is automatically updated on the LCD display. In case of any abnormal situation, an audible alarm will sound, and the display will show the specific alert.

Figure 8: Real-time Monitoring in Action

5.2 Automatic Start

The monitor automatically starts up when the motorcycle is started. The sensors automatically transmit data to the display unit, ensuring continuous monitoring without manual intervention.

Figure 9: Automatic Start Feature

5.3 Alarming States and Preset Values

The system is equipped with multiple alarm functions to alert you to potential tire issues. The user preset values are:

• High Pressure Alarming: 3.0 BAR
• Low Pressure Alarming: 2.0 BAR
• High Temperature Alarming: 69°C

When an alarm condition is met, the display will show the corresponding icon and value, flashing with an audible alarm. Press any button to turn off the audible alarm; the icon will continue to flash until the problem is resolved.

Figure 10: Alarming States Display

5.4 Quick Air Leakage Alert

The system can detect a quick tire leakage and prompt an alarm within 3 seconds, significantly reducing the risk of accidents.

Figure 11: Quick Leakage Alarm

6. Hooldus

6.1 Monitor Charging

The display unit features a built-in explosion-proof aluminum battery and supports USB fast charging. Connect the monitor to a USB power source using the provided charging cable.

Figure 12: USB Fast Charging

The monitor has temperature protection for its battery:

• When the display senses the temperature reaches 70°C, it will automatically stop charging.
• When the display senses the temperature reaches 80°C, it pauses and starts to protect itself.
• When the temperature drops back to normal, the display automatically resumes normal monitoring status.

6.2 External Sensor (WI) Battery Replacement

The battery in external sensors is user-replaceable. The sensor battery has been installed before delivery. If you need to replace it:

1. Take out the tamper gasket.
2. Use a hardware wrench to open the sensor housing.
3. Take out the old button battery.
4. Put a new battery into the sensor and reassemble.

Figure 13: External Sensor Battery Replacement

6.3 Internal Sensor (TH) Battery

The battery in internal sensors is not designed to be user-replaceable. If the internal sensor battery needs replacement, it requires professional service.

7. Veaotsing

• Sensors not connecting/displaying data: Ensure the display unit is powered on before installing the sensors. Check that sensors are installed correctly and securely. If issues persist, try re-pairing the sensors according to the device's settings menu (refer to the specific pairing instructions in your monitor's menu, if available).
• Display is dark or not turning on: Ensure the monitor is fully charged using the provided USB cable. Check the brightness settings on the display unit.
• Cannot change settings for a specific tire (e.g., front tire): Navigate through the display unit's menu to find individual tire settings. Some systems may require specific button presses or menu navigation to select and adjust parameters for each tire.
• Ebatäpsed näidud: Ensure sensors are correctly installed and tightened. Verify that the tire pressure is measured with a reliable gauge to compare with the TPMS readings.
• Alarm sounds frequently: Check the preset alarm thresholds (high/low pressure, high temperature) and adjust them if necessary to match your motorcycle's recommended tire specifications.

8. Tehnilised andmed

8.1 Üldised spetsifikatsioonid

8.2 Monitor Display Unit

Figure 14: Monitor Dimensions and Display Elements

8.3 Internal Sensor (TH) Specifications

Figure 15: Internal Sensor Dimensions

8.4 External Sensor (WI) Specifications

Figure 16: External Sensor Dimensions

9. Kasutaja nõuanded

• Algseadistus: Always power on the display unit before installing the sensors to ensure proper pairing and immediate data display.
• Anduri ühendus: If sensors are not connecting, double-check their installation and ensure the display is powered. Refer to the troubleshooting section for re-pairing steps if necessary.
• Ekraani nähtavus: If the screen appears dark, ensure the monitor is fully charged. Adjust the display brightness settings if available.
• Tire Configuration: If you encounter difficulty changing settings for individual tires, explore the monitor's menu options thoroughly. Some systems have specific sub-menus for front and rear tire adjustments.
• Regulaarsed kontrollid: Even with TPMS, it's good practice to periodically check tire pressure with a manual gauge for cross-verification.

10. Garantii ja tugi

For warranty information and technical support, please refer to the documentation provided with your purchase or contact CAREUD customer service. Keep your proof of purchase for warranty claims.