Generic 2-in-1 Cordless Rivet Gun Set User Manual

1. Sissejuhatus

The Generic 2-in-1 Cordless Rivet Gun Set is a versatile tool designed for efficient rivet installation. This portable electric riveter operates on a 26V battery and is suitable for various applications in home, garage, and workshop environments. It supports M3-M12 inserts for riveting iron, aluminum, and stainless steel nuts. This manual provides instructions for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

2. Ohutusjuhised

Elektriliste tööriistade kasutamisel järgige alati põhilisi ohutusnõudeid, et vähendada tulekahju, elektrilöögi ja kehavigastuste ohtu.

• Lugege juhendit: Enne tööriista kasutamist tutvuge kõigi juhiste ja hoiatustega.
• Kandke silmade kaitset: Kandke alati kaitseprille või külgkaitsega kaitseprille.
• Hoidke tööala puhtana: Cluttered areas invite accidents. Ensure your workspace is well-lit.
• Vältige ohtlikke keskkondi: Ärge kasutage elektritööriistu punktis damp või niisketes kohtades või jätke need vihma kätte.
• Kinnitage toorik: Alati klamp or secure the workpiece to prevent movement during operation.
• Toite lahtiühendamine: Enne tööriista reguleerimist, tarvikute vahetamist või hoiulepanekut eemaldage alati aku tööriistast.
• Use Correct Rivet Head: Ensure the correct size rivet head is installed for the specific rivet nut being used.
• Tööriista hooldus: Keep the tool clean and in good working condition. Inspect for damage before each use.

3. Pakendi sisu

Lahtipakkimisel veenduge, et kõik esemed on olemas:

• Juhtmeta neetipüstol
• 26V Lithium-ion Battery (5200mAh, quantity 2)
• Akulaadija
• M3, M4, M5, M6, M8, M10, M12 Rivet Heads (Mandrels)
• Wrench for changing rivet heads
• Kasutusjuhend

4. Toote omadused

The Cordless Rivet Gun Set incorporates several features designed for efficiency and ease of use:

• 2-ühes funktsionaalsus: Capable of both riveting and rivet nut installation.
• One-Touch Automatic Riveting: Simplifies the riveting process.
• Intelligent Stroke Adjustment: Adapts to different riveting requirements.
• Intelligent Memory Mode: Records and repeats riveting processes for consistency.
• Harjadeta mootor: Provides enhanced durability, efficiency, and longer tool life.
• LED valgustus: Valgustab tööala parema nähtavuse tagamiseks.
• Reguleeritav kiirus: Offers High (H) and Low (L) speed settings for various applications.
• Fast Heat Dissipation System: Multiple cooling holes prevent overheating during extended use.
• Suure mahutavusega liitiumaku: Provides extended operating time.

Image: Product details highlighting adjustable high and low speed gears, porous cooling system, instant LED light, and 26V large capacity lithium batteries.

5. Komponentide ja osade identifitseerimine

Familiarize yourself with the different parts of your rivet gun:

Image: Labeled diagram of the cordless rivet gun, identifying key components such as the heat dissipation vent, gear adjustment, self-locking gun head, pull female head, LED lighting, start switch, anti-slip handle, smart button panel, battery removal switch, and lithium battery.

• Heat Dissipation Vent: For quick heat removal.
• Käigu reguleerimine: Juhib tööriista kiirust.
• Self-locking Gun Head: Secures the rivet head.
• Pull Female Head: The part that engages with the rivet nut.
• LED valgustus: Valgustab tööala.
• Käivituslüliti: Aktiveerib tööriista.
• Libisemisvastane käepide: Provides a secure grip.
• Smart Button Panel: For mode selection and battery display.
• Battery Removal Switch: Vabastab aku.
• Liitiumaku: Annab tööriistale võimsust.

6. Seadistamine

6.1 Aku paigaldamine ja laadimine

Aku laadimine:

1. Ühendage akulaadija tavalisse pistikupessa.
2. Sisestage aku laadijasse.
3. Allow 0.5 to 1 hour for a full charge. The charger indicator will signal when charging is complete.

Aku paigaldamine/eemaldamine:

1. To install, align the battery pack with the base of the rivet gun and slide it in until it clicks securely into place.
2. To remove, press the battery removal switch located on the battery pack and slide the battery out.

6.2 Attaching Rivet Heads (Mandrels)

The tool comes with various rivet heads for M3-M12 rivet nuts.

1. Select the appropriate rivet head size that matches your rivet nut.
2. Unscrew the existing rivet head (if any) from the self-locking gun head.
3. Insert the desired rivet head into the self-locking gun head and tighten it securely. Use the provided wrench if necessary to ensure it is firm.

7. Kasutusjuhised

7.1 Basic Operation and Riveting Process

The tool features a one-touch automatic riveting function.

1. Ensure the correct rivet head is installed and the battery is charged.
2. Insert the crimping nut onto the installed rivet head.
3. Position the tool against the workpiece where the rivet nut is to be installed.
4. Pull the start switch (trigger). The tool will automatically begin the riveting process.
5. The riveting process typically completes in approximately 3 seconds. The tool will automatically perform nail removal after riveting.

Pilt: Lähivõte view illustrating the one-click automatic riveting and subsequent automatic nail removal after riveting, using an M5 rivet nut.

7.2 Smart Button Panel and Speed Adjustment

The smart button panel provides information and control over the tool's operation.

Pilt: Detailne view of the smart button panel, showing the battery indicator (Power Display 1, 2, 3 lights), Mode+Gear Switch Key, and Function Mode Light. It indicates that 3 lights mean full power, the first light flashing means insufficient power, and lights up in L or H position for speed.

• Battery Indicator (Power Display): Three lights indicate the battery charge level. If the first light flashes, it indicates insufficient power.
• Mode/Gear Switch Key: A short press of this button switches between memory mode and working mode.
• Function Mode Light: This light flashes when in memory mode and remains continuously on when in working mode.
• Kiiruse reguleerimine: The tool offers two speed settings: 'H' for high speed and 'L' for low speed. Select the appropriate speed based on the material and rivet size.

8. Hooldus

Proper maintenance ensures the longevity and reliable operation of your rivet gun.

• Puhastamine: Puhastage tööriista välispinda regulaarselt pehme lapigaamp cloth. Ensure cooling vents are free from dust and debris to maintain efficient heat dissipation.
• Hoiustamine: Store the rivet gun and its accessories in a dry, secure place, away from direct sunlight, moisture, and extreme temperatures.
• Rivet Head Inspection: Periodically inspect the rivet heads for wear or damage. Replace worn rivet heads to ensure proper riveting performance.
• Aku hooldus: Hoidke akusid jahedas ja kuivas kohas. Ärge hoidke täielikult tühjenenud akusid pikka aega.

9. Veaotsing

Levinud probleemide ja nende lahenduste kohta vaadake allolevat tabelit.

10. Tehnilised andmed

Technical data for the Cordless Rivet Gun Set:

Image: Diagram showing the dimensions of the rivet gun (220mm length, 42mm head width, 43mm body width, 44mm handle width, 75mm battery height, 115mm battery length) and key specifications.

10.1 Riveting Capacity (Iron and Aluminum Nuts)

11. Klienditugi

For any questions or assistance regarding the use, maintenance, or troubleshooting of your Generic 2-in-1 Cordless Rivet Gun Set, please contact customer support. We aim to provide a response within 24 hours.