Oluline ohutusteave
Please read all instructions carefully before operating the Diecast Masters 1:24 Caterpillar RC 336 Excavator. Failure to follow these instructions may result in injury or damage to the product.
- Soovitatav vanus: See toode on mõeldud 8-aastastele ja vanematele kasutajatele.
- Lämbumisoht: Sisaldab väikesi osi. Ei sobi alla 3-aastastele lastele.
- Aku ohutus: Use only specified batteries. Do not mix old and new batteries, or different types of batteries. Dispose of batteries properly.
- Järelevalve: Nooremate kasutajate puhul on soovitatav täiskasvanu järelevalve.
- Töökeskkond: Operate the excavator in open, clear areas, away from people, pets, and obstacles. Avoid operating near water or in wet conditions.
Pakendi sisu
Veenduge, et pakendis on kõik allpool loetletud esemed:
- 1x Diecast Masters 1:24 Caterpillar RC 336 Excavator
- 1x kaugjuhtimispult
- 1x USB Charger with Cable
- 2x AAA Batteries (for controller)
- 1x Lithium Battery (for excavator)

Image: The Diecast Masters 1:24 Caterpillar RC 336 Excavator shown in its window box packaging, displaying the excavator and controller.
Seadistamine
1. Aku paigaldamine
Kaugjuhtimispuldi jaoks:
- Leidke kaugjuhtimispuldi tagaküljel asuv patareipesa.
- Avage patareipesa kaas.
- Insert the two (2) AAA batteries, ensuring correct polarity (+/-).
- Sulgege akupesa kaas kindlalt.

Image: The remote controller for the Diecast Masters RC Excavator, showing its dual joysticks and 2.4GHz branding.
Ekskavaatori jaoks:
- Locate the battery compartment on the underside or rear of the excavator.
- Avage patareipesa kaas.
- Connect the included lithium battery to the excavator's power connector.
- Asetage aku sahtlisse ja sulgege kaas kindlalt.
2. Ekskavaatori aku laadimine
Before first use, fully charge the excavator's lithium battery.
- Connect the lithium battery to the USB charger cable.
- Plug the USB charger into a standard USB power adapter (not included) or a computer USB port.
- The charging indicator light on the USB charger will show the charging status (refer to charger instructions for specific light indications).
- Kui aku on täielikult laetud, ühendage see laadijast lahti. Ärge laadige üle.
Kasutusjuhised
1. Toide sisse ja paaristamine
- Ensure both the excavator and the remote controller have fresh or fully charged batteries installed.
- Turn on the power switch on the excavator.
- Lülitage kaugjuhtimispuldi toitelüliti sisse.
- The controller and excavator should automatically pair. An indicator light on the controller will confirm successful pairing (refer to controller for specific light indications). If pairing fails, turn both off and on again.
2. Juhtnupud
The remote controller allows for full function control of the excavator. Familiarize yourself with the controls before operating.
- Vasak juhtkang: Controls forward/backward movement and left/right turning of the tracks.
- Parem juhtkang: Controls the movement of the excavator arm (up/down) and shovel (scoop/dump).
- Additional Buttons/Levers: May control the rotation of the upper cart (360 degrees) or other specific functions. Refer to the controller's markings for precise functions.

Pilt: Külg view of the Diecast Masters 1:24 Caterpillar RC 336 Excavator, showcasing its detailed arm and tracks.

Image: Three-quarter front view of the Diecast Masters 1:24 Caterpillar RC 336 Excavator, highlighting the fully articulated arm and shovel.

Pilt: Esikülg view of the Diecast Masters 1:24 Caterpillar RC 336 Excavator, showing the CAT logo and the front of the tracks.
Hooldus
- Puhastamine: Wipe the excavator and controller with a soft, dry cloth after use. Do not use water or chemical cleaners.
- Hoiustamine: Store the product in a cool, dry place away from direct sunlight and moisture. Remove batteries from both the excavator and controller if storing for extended periods.
- Aku hooldus: Do not leave batteries charging unattended. Do not puncture or damage batteries.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Ekskavaator ei reageeri. | Low or dead batteries in excavator or controller. Not paired. | Charge/replace batteries. Re-pair the controller and excavator. |
| Lühike juhtimisulatus. | Interference from other 2.4G devices. Low batteries. | Move to an area with less interference. Charge/replace batteries. |
| Ekskavaator liigub aeglaselt või on funktsioonid nõrgad. | Ekskavaatori aku tühjenemas. | Recharge the excavator's lithium battery. |
Tehnilised andmed
| Mudeli nimi: | 1:24 RC Cat 336 Excavator |
| Mudeli number: | 25005 |
| Kaubamärk: | Diecast Masters |
| Skaala: | 1:24 Skaala |
| Juhtimissagedus: | 2.4G |
| Juhtimiskaugus: | 25 meetrit (umbes 82 jalga) |
| Excavator Power Source: | Liitiumaku (kaasas) |
| Controller Power Source: | 2x AAA patareid (kaasas) |
| Materjal: | Plastikust |
| Kauba mõõtmed (P x L x K): | 16.93 x 5.71 x 10.04 tolli (43 x 14.5 x 25.5 cm) |
| Soovitatav vanus: | 8+ aastat |
Garantii ja tugi
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Diecast Masters websait. Hoidke ostutšekk ostutõendina alles.
For additional information or to explore other Diecast Masters products, you may visit the Diecast Masters Store on Amazon.