FiiO K3 Type-C USB DAC Headphone Amp Kasutusjuhend

1. Sissejuhatus

Tänan ostu eestasing the FiiO K3 Type-C USB DAC Headphone Amp. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance and longevity. The FiiO K3 is a high-performance digital-to-analog converter and headphone amplifier designed to enhance your audio experience with various devices, including computers and other audio sources.

Figure 1: FiiO K3 Type-C USB DAC Headphone Amp

2. Seadistamine

Follow these steps to set up your FiiO K3 for the first time.

2.1 Pakendi sisu

Enne jätkamist veenduge, et pakendis on kõik esemed olemas:

• FiiO K3 seade
• USB-tüüpi C-andmekaabel
• Anti-slip Tape (4 pieces)
• Kiirjuhend
• Garantiikaart

Figure 2: FiiO K3 and included accessories

2.2 Arvutiga ühendamine

Connect the FiiO K3 to your computer using the provided USB Type-C cable. The K3 draws power directly from the USB port.

Figure 3: Front panel of FiiO K3 with headphone outputs and controls.

Figure 4: Rear panel of FiiO K3 with USB-C, Line Out, Coaxial Out, and Optical Out ports.

USB helirežiimid

The FiiO K3 supports two USB Audio modes, selectable via a switch on the rear panel:

• USB Audio 1.0 (Driver-Free): This mode is plug-and-play and does not require driver installation. It supports up to 96kHz/24-bit PCM audio. Compatible with Windows, macOS, and Linux.
• USB Audio 2.0 (Requires Driver): This mode offers higher performance, supporting up to 384kHz/32-bit PCM and DSD256. For Windows operating systems, a specific driver must be installed. For macOS and Linux, it is typically driver-free.

To download the Windows USB 2.0 driver, visit the official FiiO support websait: www.fiio.com/supports.

2.3 Kõrvaklappide ühendamine

The FiiO K3 features two headphone output jacks on the front panel:

• 3.5 mm üheotsaline väljund: For standard headphones.
• 2.5 mm tasakaalustatud väljund: For headphones with a balanced connection, offering improved sound separation and power.

Plug your headphones into the appropriate jack. Ensure the connection is secure.

2.4 Connecting to External Audio Devices

The FiiO K3 provides multiple output options for connecting to external speakers, amplifiers, or other DACs:

• 3.5mm Line Out: Connects to the analog input of an amplifier or active speakers. The volume of the Line Out is controlled by the K3's volume knob.
• Coaxial Out: Provides a digital coaxial output for connecting to an external DAC or amplifier with a coaxial input.
• Optiline väljund: Provides a digital optical output for connecting to an external DAC or amplifier with an optical input.

When using the Line Out, Coaxial Out, or Optical Out, ensure that the connected device is set to the correct input source.

3. Kasutusjuhised

3.1 Toite sisse-/väljalülitamine ja helitugevuse reguleerimine

The large knob on the front panel serves as both the power switch and volume control. Rotate it clockwise to power on the device and increase the volume. Rotate counter-clockwise to decrease the volume and power off the device when turned fully to the left.

3.2 Võimenduslüliti

The K3 features a gain switch (labeled "GAIN") on the front panel. This switch allows you to adjust the output level to match the impedance and sensitivity of your headphones:

• Madal võimendus: Suitable for sensitive headphones or earphones.
• Kõrge kasum: Provides more power for high-impedance or less sensitive headphones.

Adjust the gain setting to achieve a comfortable listening volume without distortion.

3.3 Bass Boost Switch

The bass boost switch (labeled "BASS") on the front panel allows you to enhance the low-frequency response of your audio. Toggle it on or off according to your preference.

Figure 5: Close-up of the FiiO K3 front panel showing volume knob, bass switch, and gain switch.

3.4 RGB Indicator

The RGB indicator light located near the volume knob displays the current sampling rate of the audio being played:

• Sinine: 44.1 kHz või 48 kHzamplingi määr.
• Kollane: Sampling rate greater than 48kHz.
• Roheline: DSD audio.
• Punane: Signaali pole.

4. Hooldus

Nõuetekohane hooldus tagab teie FiiO K3 pikaealisuse ja optimaalse jõudluse.

• Puhastamine: Use a soft, dry cloth to wipe the device. Avoid using harsh chemicals or abrasive materials.
• Käitlemine: Käsitsege seadet ettevaatlikult. Vältige selle maha kukkumist ja liigse jõu kasutamist.
• Keskkond: Keep the device away from extreme temperatures, direct sunlight, moisture, and dust.
• Anti-slip Tape: Apply the provided anti-slip tape to the bottom of the unit to prevent it from sliding on surfaces.

5. Veaotsing

Kui teil tekib FiiO K3-ga probleeme, vaadake järgmisi levinud probleeme ja lahendusi.

5.1 Heli puudub

• Kontrollige ühendusi: Ensure all cables (USB, headphones, line out) are securely connected.
• Helitugevuse tase: Verify that the volume knob on the K3 is turned up and not at its minimum setting. Also check the volume level on your computer or connected audio device.
• Sisendi/väljundi valik: Confirm that your computer's audio output is set to the FiiO K3. If using Line Out, ensure your external amplifier/speakers are set to the correct input.
• RGB Indicator: If the RGB indicator is red, there is no signal. Check your source device and connections.

5.2 Moonutatud heli

• Võimenduse seadistus: If the sound is distorted, try switching the GAIN to "Low" for sensitive headphones.
• Helitugevuse tase: Reduce the volume on both the K3 and your source device to prevent clipping.
• Allika kvaliteet: Veenduge, et heliallikas file ei ole rikutud ega madala kvaliteediga.
• Kaabli terviklikkus: Check if the cables are damaged or faulty.

5.3 USB 2.0 Driver Issues (Windows)

• Draiveri installimine: Ensure the correct FiiO USB 2.0 driver is installed from the official FiiO websaidile.
• USB-port: Proovige ühendada arvuti muu USB -port.
• Taaskäivitamine: Pärast draiveri installimist taaskäivitage arvuti.

6. Tehnilised andmed

7. Garantii ja tugi

The FiiO K3 comes with a standard manufacturer's warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support, driver downloads, firmware updates, and frequently asked questions, please visit the official FiiO websait:

FiiO Support Page

You may also contact FiiO customer service directly through their websaidile täiendava abi saamiseks.