GREE MC20700140 juhtmega kontrolleri kasutusjuhend

1. Toote lõppview

The GREE MC20700140 Wired Controller is designed for managing multi-zone ductless HVAC systems. It features a fully lit large LCD display and push buttons for easy operation. This controller allows users to adjust fan speeds, set precise room temperatures, and utilize various operational modes to optimize comfort and energy efficiency.

Key features include a timer mode for scheduled operation, a sleep mode for energy savings during rest, a turbo mode for rapid temperature changes, and an X-Fan function to prevent moisture buildup. The controller also includes a privacy lock feature to prevent unauthorized setting changes and stores settings in non-volatile memory in case of power loss. It supports both Fahrenheit and Celsius display modes and provides error codes for troubleshooting.

2. Seadistamine ja installimine

The GREE MC20700140 Wired Controller is designed for straightforward installation. It can be mounted flush on a wall or using a standard electrical box. The package includes keyed connectors and a 26-foot cable for connection to the indoor unit.

2.1 Paigaldusvalikud

• Flush Wall Mount: Secure the controller directly to the wall surface.
• Electrical Box Mount: Install the controller using a standard electrical box for a recessed finish.

2.2 Juhtmete ühendamine

Connect the controller to the indoor unit using the provided 26-foot cable and keyed connectors. Ensure all connections are secure before powering on the system.

Figure 1: GREE MC20700140 Wired Controller. This image displays the front view of the wired controller, showing its LCD screen and button layout.

2.3 Ühilduvus

The XK-19 series controller (MC20700140) is compatible with various multi-zone indoor units. Refer to the compatibility chart below to ensure your unit is supported.

Figure 2: GREE Tether Wired Controller Compatibility Chart. This chart lists the XK-19 series (MC20700140) and its compatibility with multi-zone cassette, multi-slim duct, and multi-floor/ceiling units.

3. Kasutusjuhised

The wired controller provides comprehensive control over your HVAC system. Upon powering on, the unit will resume operation with the last saved settings.

3.1 Nuppude funktsioonid

Figure 3: GREE Wired Controller Button Functions. This image illustrates each button on the controller and its primary function.

• SISSE/VÄLJA: Vajutage seadme sisse- või väljalülitamiseks.
• MODE: Press to select and adjust each operating mode: Auto, Cool, Heat, Dry, Fan Only.
• KIIG: Press to control the vertical angle of the louvers and redirect airflow.
• MA TUNNEN: Press to activate the I FEEL function, allowing the unit to sense temperature at the controller's location.
• KELL: Press to display the current time or remaining timer duration.
• TURBO: Press to boost cooling or heating capacity for rapid temperature changes.
• Fänn: Press to select fan speed (Auto, Low, Medium, High). Auto is the default setting.
• +/- nupud: Press to raise or lower settings, including temperature. Press once for slow adjustment, hold down for fast adjustment.
• MAGA: Press to select one of three sleep modes, which adjust room temperature during sleep for comfort and energy savings. Refer to the owner's manual for more details.
• T-SISSE/T-VÄLJA: Press to start or stop the timer. Adjust with the "+" and "-" buttons. Refer to the owner's manual for more details.
• X-FAN: Press to run the fan after the cooling cycle to dry off the coil, helping to inhibit bacteria and mildew growth.
• VALGUS: Press to turn on lights on the unit's Front Panel Display. Press again to turn off.
• TEMP: Press to set the desired room temperature. Adjust with the "+" and "-" buttons.

3.2 Peamised omadused ja funktsioonid

Figure 4: GREE Wired Controller Key Features and Functions. This image details advanced operational modes and settings.

• SULATUSFUNKTSIOON: Increases room comfort and saves energy by sensing the need for defrosting and eliminating unnecessary defrost cycles.
• UNEREŽIIM: Automatically adjusts room temperatures during sleep time to maximize comfort and reduce energy consumption.
• TURBO REŽIIM: A boost function to quickly reach a desired temperature setpoint for heating or cooling. Once the setpoint is achieved, Turbo Mode can be deactivated for normal operation.
• X-FAN MODE: Especially useful in humid areas, this function allows the indoor fan to run for a predetermined amount of time after the unit is turned off to remove additional moisture from the coil.
• MA TUNNEN: This function senses the temperature at the remote controller instead of at the indoor unit. It then adjusts airflow and temperature accordingly for optimal personal comfort and energy savings.
• PRIVACY LOCK MODE: Prevents unauthorized access or tampering with the system's settings. To lock the controller, push the "+" and "-" buttons simultaneously for 2 seconds. Repeat to unlock.
• OPTIONAL PHOTOCATALYTIC FILTER: Advanced technology to improve indoor air quality and prevent the spread of bacteria and viruses.

4. Hooldus

Regular maintenance ensures optimal performance and longevity of your HVAC system. The X-Fan function is a key feature for maintaining indoor unit hygiene.

• X-Fan funktsioon: Utilize the X-Fan function to remove moisture from the indoor coil when the system is turned off. This helps prevent the growth of mold, bacteria, and mildew, keeping your indoor coil and fan clean.
• Filtri puhastamine: Periodically clean or replace the air filters in your indoor unit as per your HVAC system's specific instructions.
• Kontrolleri puhastamine: Wipe the surface of the wired controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.

5. Veaotsing

The system constantly monitors operating conditions for errors and malfunctions. If issues arise, the controller will display status codes to assist with troubleshooting and repair.

5.1 Korduma kippuvad küsimused (KKK)

Figure 5: GREE Wired Controller Frequently Asked Questions. This image provides answers to common operational questions.

• Miks ventilaator jätkab tööd isegi siis, kui seade ei jahuta ega soojenda?
  Pideva temperatuuri hoidmiseks ja pidevatest käivitustest ja seiskamistest tuleneva energiakadu minimeerimiseks hoiab ventilaator õhuvoolu termostaadist mööda.
• Millist temperatuuri kaugjuhtimispuldil kuvatakse?
  The remote always displays your desired indoor temperature. You may view current indoor and outdoor temperatures on the indoor unit's Front Panel Display.
• Mis juhtub, kui kaugjuhtimispult on kadunud või kahjustatud?
  Use the Manual Override button to manually operate the unit. Lift up the front panel section on the indoor unit and locate the button on the right-hand side. Press the button to turn ON the unit. (Note: Not all functions will be available.) Press again to cancel Manual Override Mode and transfer control back to the remote controller.

Note: Not all features are available on all models. Your actual air conditioning and heating system and related devices may differ from the images shown in this manual.

6. Tehnilised andmed