Philips 17W 24in T8 Bright White Fluorescent Tube User Manual

Sissejuhatus

This manual provides essential information for the safe and effective use of your Philips 17W 24in T8 Bright White Fluorescent Tube, Model 280909. Please read these instructions carefully before installation and retain them for future reference.

Ohutusteave

Elektrioht: Always disconnect power to the fixture before installing, removing, or servicing the fluorescent tube. Failure to do so may result in electric shock or injury.
Fragile Item: Fluorescent tubes are made of glass and can break. Handle with care to prevent injury.
Elavhõbeda sisaldus: This product contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/mercury lisateabe saamiseks.
Ühilduvus: Ensure the fluorescent tube is compatible with your fixture's ballast and socket type (G13 Medium Bi-Pin).
Ainult siseruumides kasutamiseks: This bulb is designed for indoor applications.

Toode läbiview

The Philips 17W 24in T8 Bright White Fluorescent Tube is designed to provide efficient and bright illumination. It features a T8 bulb shape and a G13 (Medium Bi-Pin) base for standard fluorescent fixtures.

Figure 1: Philips 17W 24in T8 Bright White Fluorescent Tube. This image shows the cylindrical glass tube with bi-pin connectors at each end.

Tehnilised andmed

Funktsioon	Detail
Kaubamärk	Philips
Mudeli number	280909
Wattage	17 vatti
Pirni kuju suurus	T8
Pirni alus	G13 (keskmise suurusega kahetihvtiline)
Hele Värv	Hele valge
Värvi temperatuur	5000 kelvinit
Heledus	1300 XNUMX luumenit
Värviedastusindeks (CRI)	82
Voltage	240 volti (AC)
Pikkus	24 tolli
Läbimõõt	1 tolli
Hinnanguline eluiga	24,000 hours (approx. 22.2 years based on 3 hrs/day)
Kasutamine siseruumides/välistingimustes	Siseruumides

Seadistamine ja installimine

Toite katkestamine: Before beginning installation, ensure the power supply to the fluorescent light fixture is completely turned off at the circuit breaker or fuse box.
Eemaldage vana toru (kui see on olemas): If replacing an existing tube, carefully twist the old tube approximately 90 degrees and gently pull it out of the sockets. Dispose of the old tube properly according to local regulations.
Kontrollige seadet: Check the fixture's sockets and wiring for any damage. Ensure the ballast is compatible with T8 fluorescent tubes.
Uue toru paigaldamine: Align the two pins at each end of the Philips T8 fluorescent tube with the slots in the fixture's sockets. Gently push the tube into the sockets until it is fully seated, then twist it approximately 90 degrees until it locks into place. Do not force the tube.
Toite taastamine: Once the tube is securely installed, restore power to the fixture from the circuit breaker.
Test: Nõuetekohase töö kontrollimiseks lülitage valguslüliti sisse.

If the tube does not light, ensure it is properly seated and twisted into the sockets. If issues persist, refer to the Troubleshooting section.

Kasutusjuhised

Operating the Philips T8 fluorescent tube is straightforward. Once installed in a compatible fixture with power restored, simply use the fixture's wall switch or integrated switch to turn the light on and off.

Kohe sisse lülitatud: This fluorescent tube is designed for quick illumination.
Optimaalne jõudlus: For optimal performance and lifespan, avoid frequent on/off cycling.

Hooldus

Puhastamine: To clean the fluorescent tube, ensure the power is off and the tube is cool. Gently wipe the tube with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the tube.
Asendamine: Replace the tube when it reaches the end of its life (indicated by flickering, dimming, or failure to light). Follow the installation instructions in reverse to remove the old tube and install a new one.
Kinnitusvahendite hooldus: Periodically inspect the light fixture for dust accumulation, loose wiring, or damaged sockets. Clean the fixture as needed.

Veaotsing

Probleem	Võimalik põhjus	Lahendus
Tube does not light	Kinnitusvõimsus puudub Tube not properly seated Faulty tube Faulty ballast or starter (if applicable)	Kontrollige kaitselülitit/kaitset. Ensure tube is twisted and locked into sockets. Replace tube with a new one. Ballasti/starteri kontrollimiseks/vahetamiseks konsulteerige kvalifitseeritud elektrikuga.
Tube flickers	Toru eluiga läheneb lõpule Lahtine ühendus Vale ballast	Replace tube. Ensure tube is securely seated. Verify ballast compatibility.
Hämar valguse väljund	Toru eluiga läheneb lõpule Dust/dirt on tube or fixture	Replace tube. Clean tube and fixture.

Kõrvaldamise teave

This fluorescent tube contains a small amount of mercury. It is important to dispose of it responsibly to protect the environment. Do not dispose of fluorescent tubes in regular household trash.

Taaskasutus: Many communities offer recycling programs for fluorescent bulbs. Check with your local waste management authority for recycling options in your area.
Hazardous Waste Facilities: Some areas require fluorescent bulbs to be taken to special household hazardous waste collection sites.
For more information on mercury-containing products and disposal, please visit the U.S. Environmental Protection Agency (EPA) websait: www.epa.gov/mercury.

Garantii ja tugi

For warranty information and customer support regarding your Philips fluorescent tube, please refer to the documentation provided with your purchase or visit the official Philips lighting website. Philips products are designed for quality and reliability.

Contact Philips: For technical assistance or product inquiries, please visit www.lighting.philips.com või vaadake toote pakendil olevat kontaktteavet.

Philips 280909